Example 2: A deaf passenger is planning to board the plane with his service animal. The service animal is a hearing dog and is small enough to sit on the deaf passenger’s lap....
Search Results "Floor Plan"
Filters
Commonly Searched Documents
-
Verification of Service Animals
-
Triggering event. (Section-by-Section Analysis)
For example, an owner can plan construction to start before the new standards take effect and therefore use the 1991 Standards in the design....
-
Designed and Constructed for First Occupancy (Section-By-Section Analysis and Response to Comments)
First, it is helpful for designers and builders to have a fixed date for accessible design, so that they can determine accessibility requirements early in the planning and design stage....
-
Panda S.66 Solid Wood Folding Door System
Track Options The standard track is top hung/bottom guided and mounts directly to sub-floor to ensure the smoothest possible operation....
-
I. Background
have been lowered so that controls are ADA compliant; objects, including signs, that were protruding into the circulation path by more than 4” (with undersides more than 27” above the floor...
-
4.3.6 Reach Limits
mobility users with functional reaching ability that might be expected to reach (without a weight) to a 100 mm x 100 mm (3.9 in. x 3.9 in.) target location in space at a given height from the floor...
-
11B-1003.2.1 Boat slips
Where handrail extensions are provided on gangways or transition plates, the handrail extensions shall not be required to be parallel with the ground or floor surface. 7. ...
-
Passenger Elevators
The guidelines provide an exception for private sector facilities based on the number of stories or the square footage per floor (206.2.3, Exception 1)....
-
11B-226.4 Baby changing tables
This has been generally understood to include the technical requirements for accessible routes, clear floor space, reach ranges, knee and toe space, worksurface heights, operable parts and...
-
902 Dining Surfaces and Work Surfaces
Clear floor space is required for a forward approach (902.2), and a surface height of 28 to 34 inches is specified (902.3)....
-
APPENDIX A
A key issue addressed in the presentation is that no adjustable height exam tables are currently available that lower to 17 inches above the floor....
-
How to Measure Transfer Surface Height
typical diagonal transfer.24 Figure 11: Corner radii of a medical examination table The depth and width are measured along the centerlines of the seat, and the height from the floor...
-
6.1 Deliberative Process
Box 6.1 M301.2.1 and M302.2.1 would require the height of the transfer surface during patient transfer to be 17 inches minimum and 19 inches maximum measured from the floor to the top...
-
704.11 Parapets
The building has an area of not more than 1,000 square feet (93 m2) on any floor. 3....
-
Minimum Clear Opening
These commenters supported Option Two's approach, which provided for clear width to be determined by the clear floor space available for maneuvering on both sides of the door, with the minimum...
-
Alterations and Additions
Additions, which include an expansion, extension or increase of the gross floor area of a building or facility, are considered an alteration to a facility but the area that is added must...
-
Test Procedures
It has been correlated to the work measurement done in ASTM F1951, Accessibility of Surface Systems, for a wide array of surfacing and floor coverings....
-
DEFENDANTS’ RAISED PORCHES
The entrances with doors that flank the raised porches are not similarly covered by a roof and do not have furniture, marketing items, and a wooden floor. ...
-
11B-1003.2.1 Boat slips
Where handrail extensions are provided on gangways or transition plates, the handrail extensions shall not be required to be parallel with the ground or floor surface. 7....
-
II-1.3000 Relationship to title III
The building's first floor, however, is leased to a restaurant, a newsstand, and a travel agency....
-
Q1.) When a ramp has a maximum slope of 1:12 or 8.33%, is that considered a range of from 0% to 8.33% which would allow no slope greater than 8.33% or is that a simple maximum which would allow a tolerance above 8.33%? Similarly, is a cabinet countertop that can be no higher than 34” AFF a range of from 0” to 34” AFF with no additional height allowed, or is a tolerance allowed for variations in the floor surface or cabinet construction?
A1.) The consistent technical assistance on this question has been that both are subject to tolerances.
-
11B-604.8.1.2 Doors
Doors shall not swing into the clear floor space or clearance required for any fixture....
-
11B-104.1.1 Construction and manufacturing tolerances
Where the requirement states a specified range, such as in Section 11B-609.4 where grab bars must be installed between 33 inches and 36 inches above the floor, the range provides an adequate...
-
Mannington Mills Outlook Collection Commercial Carpet
We make beautiful floors, with Mannington's well-known standards for quality built into every product. ...
