The 2010 Standards, in section 224.5, set scoping requirements for dispersion in facilities covered by the transient lodging provisions....
Search Results "Construction Support Facility"
-
Dispersion
- Eliason Corporation SCP-8 High Pressure Laminate Traffic Door
-
New and Altered Permanently Installed Amusement Rides
These requirements apply to newly designed and constructed amusement rides and used rides when certain alterations are made....
-
Beach Access Routes
There are no scoping requirements for outdoor constructed features provided on beaches....
-
Chapter 1: Background
In 2002, the Access Board published the Accessibility Guidelines for newly construct or altered recreation facilities (1)....
-
1011.5.3 Raised Edges or Walls
Where fire rings, grills, or fireplaces are constructed with raised edges or walls, the depth of the raised edge or wall shall be 10 inches (255 mm) maximum....
-
32. Paragraph Headings
Paragraph Headings The headings, or lack thereof, preceding each of the paragraphs in this Settlement Agreement are for convenience only, and shall not be considered in the construction...
-
§35.151(e)(2)
(2) Newly constructed or altered street level pedestrian walkways must contain curb ramps or other sloped areas at intersections to streets, roads, or highways....
-
4.3.11.1(3)
(3) A portion of a one-hour fire-resistive corridor (complying with local requirements for fire-resistive construction and for openings) located immediately adjacent to an exit enclosure...
-
1011.5.3 Raised Edges or Walls
Where fire rings, grills, or fireplaces are constructed with raised edges or walls, the depth of the raised edge or wall shall be 10 inches (255 mm) maximum....
-
4.2.5 Raised Edge
Where fire rings, grills, or fireplaces are constructed with raised edges or walls, the depth of the raised edge or wall shall be 10 inches (255 mm) maximum....
-
§100.205(c)
(c) All covered multifamily dwellings for first occupancy after March 13, 1991 with a building entrance on an accessible route shall be designed and constructed in such a manner that—...
-
§ 35.151(i)(2)
(2) Newly constructed or altered street level pedestrian walkways must contain curb ramps or other sloped areas at intersections to streets, roads, or highways....
-
806 Transient Lodging Guest Rooms
were provided to show that, with some redesign, the 2010 Standards do not normally increase the square footage of an accessible sleeping room or bathroom with mobility features in new construction...
-
202.4 Alterations Affecting Primary Function Areas
If elements of a path of travel at a subject building or facility that have been previously constructed or altered in accordance with the April 1, 1994 Texas Accessibility Standards (TAS...
-
a) Curb Ramps
The priority matrix prioritizes installations/upgrades based on: (1) locations requested by citizens; (2) locations serving government offices and public facilities; (3) locations serving...
- When I Walk Video Journal 112 - Here I Am
-
26. Q: Has the United States entered into any settlement agreements involving child care centers?
braces as necessary; (3) ensure that the complainant is not unnecessarily segregated from her age-appropriate classroom; (4) engage in readily achievable barrier removal to its existing facility...
-
PATH OF TRAVEL
area with an exterior approach (including sidewalks, streets, and parking areas), an entrance to the facility, and other parts of the facility....
-
PATH OF TRAVEL
area with an exterior approach (including sidewalks, streets, and parking areas), an entrance to the facility, and other parts of the facility....
-
Accessible Pool Stairs
Accessible Pool Stairs Accessible pool stairs are designed to provide assistance with balance and support from a standing position when moving from the pool deck into the water and out...
-
Footrests and Armrests
Padding on footrests —large enough to support the whole foot—reduces the chance of injury....
-
5.2.2.2 Transfer Surface Depth Recommendation for M302
The Committee easily supported this increase as existing equipment already meets or exceeds this dimension....
-
T402.2 Design Load
Ramps and bridgeplates 30 inches (760 mm) or more in length shall be designed to support a load of 600 pounds (273 kg) minimum, placed at the centroid of the ramp distributed over an area...
