[2010 ADA Standards] 216.3 Directional and Informational Signs....
Search Results "Proposed Standard"
-
11B-216.3 Directional and informational signs
-
11B-606.3 Height
[2010 ADA Standards] 1....
-
11B-213.3.3 Urinals
[2010 ADA Standards] 213.3.3 Urinals. Where more than one urinal is provided, at least one shall comply with 605....
-
1132A.3 Width and height of interior doors and secondary exterior doors
A nominal 32-inch (813 mm) clear opening provided by a standard 6-foot wide (1829 mm) sliding patio door assembly is acceptable. ...
-
11B-202.5 Alterations to qualified historic buildings and facilities
. ◼ [2010 ADA Standards] 202.5 Alterations to Qualified Historic Buildings and Facilities....
-
11B-202.5 Alterations to qualified historic buildings and facilities
. ◼ [2010 ADA Standards] 202.5 Alterations to Qualified Historic Buildings and Facilities....
-
2. Whether this person can perform this job without posing a "direct threat" to the health or safety of the person or others
The doctor should be informed that the employer must be able to show that an exclusion of an individual with a disability because of a risk to health or safety meets the "direct threat" standard...
-
ADA Title III: Public Accommodations
They also must comply with specific requirements related to architectural standards for new and altered buildings; reasonable modifications to policies, practices, and procedures; effective...
-
3. Modified Work Schedules
Some people are unable to work a standard 9-5 work day, or a standard Monday to Friday work week; others need some adjustment to regular schedules....
-
809 Residential Dwelling Units
From footnote 39: The revisions made by the final rule to the guidelines do not change the requirements in the DOJ 2010 Standards until DOJ adopts the revisions....
-
206.2.1 Site Arrival Points
ETA Editor’s Note: Requirements for curb ramps, sidewalks and other elements in the public right of way may be covered by other Federal, State or local standards and regulations....
-
Do facilities in remote locations have to be accessible?
The decision not to make a facility accessible in accordance with the full UFAS/ADDAG standards, occurs only when the measures needed to meet the accessibility guidelines would fundamentally...
-
Historic Preservation
The architect concludes that most of the ADA Standards for alterations can be applied; however, there appears to be a problem, if one of the interior doors is widened historic decorative...
-
Acknowledgments
built environment, transit vehicles, telecommunications equipment, and electronic and information technology Providing technical assistance and training on these guidelines and standards...
-
Trailhead Signs
date The requirement for posting the construction and trail assessment date is because tree blowdowns, flooding, or other events can make trails designed and constructed to FSTAG standards...
-
Design parameter considerations
Uses non-proprietary, industry standard content formats (e.g., .mp3, .txt, .wav, .mov, etc.)...
-
Species limitations. (Section-by-Section Analysis)
would help stop erosion of the public's trust, which has resulted in reduced access for many individuals with disabilities who use trained service animals that adhere to high behavioral standards...
-
11B-228.3.2.1 Public use or common use EVCS
TOTAL NUMBER OF EVCS AT A FACILITY1 MINIMUM NUMBER (by type) OF EVCS REQUIRED TO COMPLY WITH SECTION 11B-8121 Van Accessible Standard...
-
11B-206.2.8 Employee work areas
[2010 ADA Standards] 1....
-
11B-221.1 General
[2010 ADA Standards] 221.1 General. Assembly areas shall provide wheelchair spaces, companion seats, and designated aisle seats complying with 221 and 802....
-
Program Accessibility
A program will be “viewed in its entirety” for purposes of program accessibility standard....
-
Phase II: Energy and Commerce & Public Works and Transportation Committees
Accessibility standards for Amtrak, for example, had been in effect for nearly two decades; the regulations simply were not being enforced....
-
Norton Surface Mounted Medium Duty 8000 Series Door Closer
Features: 8301/8501: Adjustable spring sizes 1-6 8301/8501: Tri-style® packaging standard (regular arm, top jamb and parallel arm mounting) 8300/8500: Sized springs 2, 3, 4, 5,...
