The protected area within which a drinking fountain is located shall be 32 inches (813 mm) wide minimum and 18 inches (457 mm) deep minimum, and shall comply with Section 11B-305.7....
Search Results "Functional Area"
-
11B-602.9 Pedestrian protection
-
1.1.3 Scope
In alteration projects, these provisions apply to the area of new work, and include the path of travel requirements found in Section 11B-202.4....
-
Safety Considerations for Site Selection
Evacuation will be easier and safer, if needed, as this allows many people with disabilities to travel unassisted on evacuation paths to a safe area outside....
-
Vertical Clearance [4.6.5]
Recommendation: Directional signage, including that at entrances, can be very helpful, especially where van spaces are located in one area only....
-
Angled (Front-In) Parking
Recommendation: Where possible, locate accessible spaces in areas where drivers have the option of backing in or consider providing an access aisle at each space so that in series an aisle...
-
2. a. iv. Path-of-Travel (wheelchair) space allowances
If a 180° turn is needed to exit an area, then a 60” diameter turning space or a 36” wide "T" is needed (see Figure 11)....
-
A trailhead
is a site designed and developed by the Forest Service or other Government agency, a trail association, trail maintaining club, trail partner, or other cooperators to provide a staging area...
-
Costs of Speech-To-Text Services
The skill and availability of service providers and the area where the meeting will be held can all affect the rates for these services....
-
1.1.3 Scope
In alteration projects, these provisions apply to the area of new work, and include the path of travel requirements found in Section 11B-202.4.◼...
-
11B-602.9 Pedestrian protection
The protected area within which a drinking fountain is located shall be 32 inches (813 mm) wide minimum and 18 inches (457 mm) deep minimum, and shall comply with Section 11B-305.7....
-
1.1.3 Scope
In alteration projects, these provisions apply to the area of new work, and include the path of travel requirements found in Section 11B-202.4. ◼...
-
Allegion LCN 2030 Series Overhead Concealed Door Control
The single lever arm and roller assembly provide smooth, quiet door control and the choice of finishes and track functions meet virtually all architectural requirements. ...
-
Brewer AssistPRO™ Power Procedure Table
The Brewer AssistPRO™ Power Procedure Table's 4-function programmability accommodates multiple positions for a wide variety of procedures. ...
-
Allegion LCN 2210 Series Overhead Concealed Door Control
A choice of finishes and cylinder functions meet correctional and vandal resistant requirements. ...
-
Allegion Falcon 2090 Cross Bar Exit Device
Specifications Hand: Specify RHR or LHR, not reversible Functions: See trim selection chart Finishes: P28, P13, P35, US26, US26D Strikes: SD36 standard...
-
Allegion LCN 2010 Series Overhead Concealed Door Control
The single lever arm and roller assembly provide smooth, quiet door control and the choice of finishes and track functions meet virtually all architectural requirements. ...
-
Sargent 7800 Mortise Lock with Push/Pull Trim Hardware
Retrofits 7800 mortise locks with same functions (consult factory). Patent pending on adaptable spindle. Engraving on paddle- consult factory ...
-
Falcon Waterfree Technologies Vitreous China Urinal F-4000
The stylish design of this waterless urinal combines an attractive appearance with functionality and efficiency....
-
American Standard Jetbrook Urinal
Its clean, functional design with a 218 extended lip make it ideal for a variety of commercial applications....
-
Operable Parts of Windows
Scoping provisions in 203.9 exempt employee work areas from the guidelines except for requirements concerning accessible routes, circulation paths, and wiring for visual alarms....
-
11B-234.3 Minimum number
These rides are not exempt from the other provisions in 234 requiring an accessible route to the load and unload areas and to the ride....
-
232 Detention Facilities and Correctional Facilities
Detention Facilities and Correctional Facilities Section 232 of the 2010 Standards establishes requirements for the design and construction of cells, medical care facilities, and visiting areas...
-
11B-223.1 General
lack of a design requirement does not mean that covered entities are not required to provide services to people with disabilities where accessible rooms are not dispersed in specialty areas...
-
F234.1 General
Where amusement rides are moved after several seasons to another area of the park or to another park, the ride would not be considered newly designed or newly constructed....
