Remember that the latch that hits the push rim is nicking the surface your fingers have to grasp thousands of times a day for years....
Search Results "Security Latch"
Filters
Commonly Searched Documents
-
Why a smooth surface door or kickplate is important
-
DORMA 8000 Series Exit Device
Exit device with deadlocking latch bolt The 8000 Series exit devices with deadlocking latch bolts minimize forced entry while offering a low-cost solution to security and life safety...
-
11. Door Maneuvering Clearance
(Note: this requires at least 18" of wall space on the latch side of the door.) [ADA Stds. 9.2.2(3); 4.13.6] Yes __ No __ N/A __ Comments: _____________________________________...
-
§382.55(a)
(a) All passengers, including those with disabilities, are subject to TSA security screening requirements at U.S. airports....
-
§ 37.167(j)(1)
(1) When an individual with a disability enters a vehicle, and because of a disability, the individual needs to sit in a seat or occupy a wheelchair securement location, the entity shall...
-
§ 38.107(a)(5)
Door latches and hardware shall be operable with one hand and shall not require tight grasping, pinching, or twisting of the wrist....
-
§ 38.123(a)(5)
Door latches and hardware shall be operable with one hand and shall not require tight grasping, pinching, or twisting of the wrist....
-
404.2.4.2 Doorways without Doors or Gates
Sliding Doors, and Manual Folding Doors Minimum Maneuvering Clearance Approach Direction Perpendicular to Doorway Parallel to Doorway (beyond stop/latch...
-
404.2.4.2 Doorways without Doors or Gates
Folding Doors Minimum Maneuvering Clearance Approach Direction Perpendicular to Doorway Parallel to Doorway (beyond stop/latch...
-
T604.1 General
When wheelchair securement systems are not in use, the systems shall not protrude into the wheelchair space except as provided in T603.5, and shall not interfere with passenger movement...
-
11B-504.8 Floor identification
703.1, 11B-703.2 _|Raised Characters|_, 11B-703.3 _|Braille|_ and 11B-703.5 _|Visual Characters|_ shall be located at the landing of each floor level, placed adjacent to the door on the latch...
-
11B-504.8 Floor identification
703.1, 11B-703.2 _|Raised Characters|_, 11B-703.3 _|Braille|_ and 11B-703.5 _|Visual Characters|_ shall be located at the landing of each floor level, placed adjacent to the door on the latch...
-
1023.9 Stairway identification signs
and braille floor identification signs that comply with Chapter 11A, Section 1143A or Chapter 11B shall be located at the landing of each floor level, placed adjacent to the door on the latch...
-
11B-604.8.1.2 Doors
A door pull complying with Section 11B-404.2.7 shall be placed on both sides of the door near the latch. ...
-
11B-604.8.1.2 Doors
A door pull complying with Section 11B-404.2.7 shall be placed on both sides of the door near the latch....
-
D.4. - Is an agency ever required to fundamentally alter its needs in order to comply with Section 508?
For example, if an agency needs to meet certain security needs by acquiring secure telephone units that are all analog, the agency would not be required to buy digital phones if such phones...
-
Clearances: ADA Standard Section 1002.4.4
Where provided, securement devices shall be permitted to overlap required clearances. 2. Wheelchair spaces shall be permitted to be mechanically or manually repositioned. 3....
-
§ 38.29(f)
(f) For vehicles in excess of 22 feet in length, the minimum interior height along the path from the lift to the securement location shall be 68 inches....
-
Clear Width: ADA Standard Section 404.2.3
Section 404.2.3 covers the current ADA Standards for clear width at manual doors, doorways and manual gates that are part of an accessible route.
-
11B-404.2.3 Clear width
Exceptions: In alterations, a projection of 5/8 inch (15.9 mm) maximum into the required clear width shall be permitted for the latch side stop....
-
Problem Four (Entrance)
Problem Four: The entrance door has a door knob and/or latch that requires tight pinching and twisting and is not accessible....
-
4.1.6(4)(d)
(i) Where existing elements prohibit strict compliance with the clearance requirements of 4.13.5, a projection of 5/8 in (16 mm) maximum will be permitted for the latch side door stop....
-
§382.127(c)
mobility device has been labeled by the manufacturer as non-spillable as provided in 49 CFR 173.159(d)(2), or if a battery-powered wheelchair with a spillable battery can be loaded, stored, secured...
-
11B-1002.4.4 Clearances
Exceptions: Where provided, securement devices shall be permitted to overlap required clearances....
