The minimum size (30” by 48”) applies whether the space is positioned for forward or side approaches....
Search Results "Forward Approach"
Filters
Commonly Searched Documents
-
Surface and Size [§305.2 and §305.3]
-
11B-231.4.1 Cubicles and counters
Where counters are provided, at least one shall comply with Section 11B-904.4.2 _|Forward Approach|_ on both the visitor and detainee sides....
-
Re: SCOTT JOHNSON v. STARBUCKS CORPORATION - AMICUS BRIEF
I think it's interesting to notice that his amicus is responding to a specific request from the court about a specific section of the ADA Standards. Notice that it does not address...
-
1011.2.1 Size and Location
sides in 305.7 of the Architectural Barriers Act Accessibility Guidelines provide additional space for maneuvering into and out of the space: 36 inches minimum by 48 inches minimum for a forward...
-
11B-232.5.1 Cubicles and counters
Where counters are provided, at least one shall comply with Section 11B-904.4.2 _|Forward Approach|_ on both the visitor and detainee or inmate sides....
-
Knee Clearance: Clearance as Measured from Dorsal Foot Point - Manual Wheelchair
This depicts knee and toe clearance required by manual chair users for forward approach to elements in the built environment (e.g., countertops)....
-
11B-232.5.1 Cubicles and counters
Where counters are provided, at least one shall comply with Section 11B-904.4.2 _|Forward Approach|_ on both the visitor and detainee or inmate sides....
-
Water Closet Clear Floor Space in Toilet Compartments
The proposed rule required this additional space in front of the fixture where only a forward approach to the water closet is provided (1102.11.5.2)....
-
11B-607.2 Clearance
Clearance in front of bathtubs shall extend the length of the bathtub and shall be 48 inches (1219 mm) wide minimum for forward approach and 30 inches (762 mm) wide minimum for parallel...
-
11B-607.2 Clearance
Clearance in front of bathtubs shall extend the length of the bathtub and shall be 48 inches (1219 mm) wide minimum for forward approach and 30 inches (762 mm) wide minimum for parallel...
-
1133A.2.1 Clear width
appliance (excluding handles and controls) that projects into the kitchen and the opposing cabinet, countertop, appliance or wall as follows: U-shaped kitchens, designed with parallel approach...
-
11B-809.9.2 Clear width
U-shaped kitchens, designed with parallel approach at a sink, range, cooktop or other fixtures and appliances located at the base of the U without knee and toe clearance, shall provide a...
-
11B-404.3.5 Controls
A level and clear floor or ground space for forward or parallel approach complying with Section 11B-305 should be provided, centered on the operating device. ...
-
Size and Clearances [4.21.2]
Where a forward approach is provided, space at least 60 inches wide provides room for turning....
-
11B-404.3.5 Controls
A level and clear floor or ground space for forward or parallel approach complying with Section 11B-305 should be provided, centered on the operating device....
-
11B-404.3.5 Controls
A level and clear floor or ground space for forward or parallel approach complying with Section 11B-305 should be provided, centered on the operating device....
-
Teeing Grounds: ADA Standard Section 238.2.1
Section 238.2.1 covers scoping requirements in the current ADA Standards for teeing grounds.
-
11B-238.2.1 Teeing grounds
Where two teeing grounds are provided for a hole, the forward teeing ground shall be designed and constructed so that a golf car can enter and exit the teeing ground....
-
11B-607.2 Clearance
Clearance in front of bathtubs shall extend the length of the bathtub and shall be 48 inches (1219 mm) wide minimum for forward approach and 30 inches (762 mm) wide minimum for parallel...
-
404.2.4.3 Recessed Doors and Gates
Maneuvering clearances for forward approach shall be provided when any obstruction within 18 inches (455 mm) of the latch side of a doorway projects more than 8 inches (205 mm) beyond the...
-
404.2.4.3 Recessed Doors and Gates
Maneuvering clearances for forward approach shall be provided when any obstruction within 18 inches (455 mm) of the latch side of a doorway projects more than 8 inches (205 mm) beyond the...
-
Counters and Bars [5.2]
Types of Counters Maximum Height Minimum Length Knee Clearance (forward approach) Dining/Bars (service) 34 in 60 in required Dining/Bars...
-
1011.4 Picnic Tables
Wheelchair spaces are required to be 30 inches minimum by 48 inches minimum; be positioned for a forward approach to the table; and provide knee and toe clearance complying with 306 of the...