Bus stop boarding and alighting areas shall have a firm, stable surface....
Search Results "Fire-Building Surface"
-
11B-810.2.1 Surface
-
11B-810.2.1 Surface
Bus stop boarding and alighting areas shall have a firm, stable surface....
-
Unitary Surface
Unitary Surfaces. The predominant surface characteristic is whole. ...
-
Technical Memorandum TM 2017-25 Door and Gate Surfaces
floor to have a smooth surface on the push side....
-
226 Dining Surfaces and Work Surfaces
226 Dining Surfaces and Work Surfaces...
-
902 Dining Surfaces and Work Surfaces
902 Dining Surfaces and Work Surfaces...
-
F202.6.5.4 Dining Surfaces and Work Surfaces
Dining surfaces and work surfaces shall comply with F226....
-
11B-233.3.1.2.1 Elevator buildings
ETA Editor's Note This section of the 2019 California Building Code was amended by the Division of the State Architect....
-
11B-606.5 Exposed pipes and surfaces
There shall be no sharp or abrasive surfaces under lavatories and sinks....
-
11B-606.5 Exposed pipes and surfaces
There shall be no sharp or abrasive surfaces under lavatories and sinks....
-
405.4 Floor or Ground Surfaces
405.4 Floor or Ground Surfaces. Floor or ground surfaces of ramp runs shall comply with 302....
-
907.5.2.3.4 Groups R-2.1, R-3.1 and R-4
are hearing impaired, shall be provided with notification appliances for the hearing impaired installed in accordance with NFPA 72 and which shall [sic] activated upon initiation of the fire...
-
907.5.2.3.4 Groups R-2.1, R-3.1 and R-4
are hearing impaired, shall be provided with notification appliances for the hearing impaired installed in accordance with NFPA 72 and which shall [sic] activated upon initiation of the fire...
-
11B-304.2 Floor or Ground Surfaces
Floor or ground surfaces of a turning space shall comply with Section 11B-302. Changes in level are not permitted. Exception: Slopes not steeper than 1:48 shall be permitted....
-
11B-304.2 Floor or Ground Surfaces
Floor or ground surfaces of a turning space shall comply with Section 11B-302. Changes in level are not permitted. Exception: Slopes not steeper than 1:48 shall be permitted....
-
1132A.9 Smooth surface
1132A.9 Smooth surface. ...
-
302 Floor or Ground Surfaces
[See subsections ...]
-
A4.5 Ground and Floor Surfaces
[See subsections ...]
-
4.5 Ground and Floor Surfaces
[See subsections ...]
-
A4.5 GROUND AND FLOOR SURFACES.
[See subsections ...]
-
4.5 GROUND AND FLOOR SURFACES
[See subsections ...]
-
302 Floor or Ground Surfaces
[See subsections ...]
-
11B-304.2 Floor or ground surfaces
Floor or ground surfaces of a turning space shall comply with Section 11B-302. Changes in level, slopes exceeding 1:48, and detectable warnings shall not be permitted....
-
2.2 Surface
The surface of an ORAR shall be firm and stable. The type of surface should be appropriate to the setting and level of development....