Public TTYs shall be identified by the International Symbol of TTY complying with Section 11B-703.7.2.2.
Search Results "Fine Signage"
-
11B-216.9.1 Identification signs
-
At least fifty percent of the entrances must be accessible.
• At least fifty percent of the entrances must be accessible. Those that are not accessible must have signs that direct the public to the nearest accessible entrance.
-
Accessible Entrances
Accessible Entrances One small step at an entrance can make it impossible for individuals using wheelchairs, walkers, canes, or other mobility devices to enter a public facility....
-
1008.1.9.7, Item 5
5. A sign shall be provided on the door located above and within 12 inches (305 mm) of the release device reading: “KEEP PUSHING. THIS DOOR WILL OPEN IN 15 [30] SECONDS ALARM...
-
216.9.1 Identification Signs
Public TTYs shall be identified by the International Symbol of TTY complying with 703.7.2.2.
-
§ 38.27 Priority seating signs
[See subsections ...]
-
11B-216.9.1 Identification signs
Public TTYs shall be identified by the International Symbol of TTY complying with Section 11B-703.7.2.2.
-
11B-216.5.2.2 Additional signs
Signs within parking facilities containing parking spaces complying with Section 11B-502 shall comply with Section 11B-502.8.
-
11B-216.5.2.2 Additional signs
Signs within parking facilities containing parking spaces complying with Section 11B-502 shall comply with Section 11B-502.8.
-
11B-216.9.1 Identification signs
Public TTYs shall be identified by the International Symbol of TTY complying with Section 11B-703.7.2.2.
-
Access Board: Tactile Sign Clear Floor Space
This video is part of a longer animation produced by the U.S. Access Board. View the animation video in its entirety on the Access Board's website...
-
4.1.6(3)(e)(iii)
(iii) When existing toilet or bathing facilities are being altered and are not made accessible, signage complying with 4.30.1, 4.30.2, 4.30.3, 4.30.5, and 4.30.7 shall be provided indicating...
-
11B-216.4.2 Areas of refuge and exterior areas for assisted rescue
Signs required by Chapter 10, Section 1009.11 to provide instructions in areas of refuge shall comply with Section 11B-703.5. Signs required by Chapter 10, Section 1009.9 at doors to...
-
11B-216.4.2 Areas of refuge and exterior areas for assisted rescue
Signs required by Chapter 10, Section 1009.11 to provide instructions in areas of refuge shall comply with Section 11B-703.5. Signs required by Chapter 10, Section 1009.9 at doors to...
-
Boost Your Business - Chapter 2 - Parking
Boost Your Business - Chapter 2 - Parking
-
Access Board: Sign Scoping
This video is part of a longer animation produced by the U.S. Access Board. View the animation video in its entirety on the Access Board's website...
-
Signaids Floor Numbering and Stair Shaft Designation-Style 1
FLOOR NUMBERING & STAIR SHAFT DESIGNATION - Braille and Tactile Style 1 - 190mm x 130mm - Gr. 1 Braille and Tactile sign - AODA Compliant (Canada) - Available in 3...
-
Signaids Floor Numbering and Stair Shaft Designation-Style 2
FLOOR NUMBERING & STAIR SHAFT DESIGNATION - Braille and Tactile Style 2 - 240mm x 240mm - Gr. 1 Braille and Tactile sign - AODA Compliant (Canada) -...
-
Seton Directional Signs - Accessible Route with ISA and Arrow
Each sign is carefully engraved with the ISA symbol Setonply® is a tough, stain-resistant multi-layered acrylic and cleans easily with a damp cloth 12"W x 4"H signs are...
-
Question 17
YES/NO 17. Are the signs for the accessible restrooms and fitting rooms still readable and mounted next to the latch side of the door, at 5 feet to...
-
Character Height [4.30.3]
Character Height [4.30.3] Characters must be sized according to the viewing distance although a minimum 3 inch upper case or capital letter height is required for overhead signs...
-
4.30.4* Raised and Brailled Characters and Pictorial Symbol Signs
4.30.4* Raised and Brailled Characters and Pictorial Symbol Signs (Pictograms). Letters and numerals shall be raised 1/32 in, upper case, sans serif or simple serif type and shall be...
-
4.30.4* RAISED CHARACTERS OR SYMBOLS
Letters and numbers on signs shall be raised 1/32 in (0.8 mm) minimum and shall be sans serif characters. Raised characters or symbols shall be at least 5/8 in (16 mm) high, but no...
-
703.6 Pictograms
703.6 Pictograms. Pictograms shall comply with 703.6.
