Door and Gate Surfaces [§404.2.10] The bottom surface of doors and gates on the push side must be smooth to a height of at least 10”....
Search Results "End-Opening Door"
Filters
Commonly Searched Documents
-
Door and Gate Surfaces [§404.2.10]
-
C. Door Hardware
Is the door hardware (lever, pull, panic bar, etc.) usable with one hand, without tight grasping, pinching or twisting of the wrist, since many persons with disabilities may not have high...
-
Besam SW200i Overhead Concealed Swing Door Operator for Dual Egress
-
Doors and Gates Operated Only By Security Personnel [§404.1, Ex]
Doors and Gates Operated Only By Security Personnel [§404.1, Ex] Manual doors, doorways, and gates that are designed to be operated only by security personnel, such as guards in...
-
408.3.2 Swinging Doors
408.3.2 Swinging Doors. Swinging hoistway doors shall open and close automatically and shall comply with 404, 407.3.2 and 408.3.2....
-
Besam SW200i Overhead Concealed Swing Door Operator
Besam SW200i overhead concealed swing door operator - beauty and durability The Besam SW200i-OHC overhead concealed pedestrian swing door operator provides an aesthetically pleasing...
-
4.17.5* Doors
Toilet stall doors, including door hardware, shall comply with 4.13....
-
1132A.2 Interior doors and secondary exterior doors
Except as allowed by Section 1109A.2, interior doors intended for user passage and secondary exterior doors shall comply with this section....
-
1132A.2 Interior doors and secondary exterior doors
Except as allowed by Section 1109A.2, interior doors intended for user passage and secondary exterior doors shall comply with this section....
-
206.5 Doors, Doorways, and Gates
206.5 Doors, Doorways, and Gates. Doors, doorways, and gates providing user passage shall be provided in accordance with 206.5....
-
D&D Technologies SureClose 57 Hydraulic Closer and Hinge
fluid Extremely safe and does not offer resistance if closed quickly in an emergency Soft, quiet closure also protects the latching/locking systemA real workhorse tested to 500,000 open...
-
Besam SW200i Overhead Concealed Swing Door Operator for Dual Egress BIM
-
Besam PowerSwing Electro-hydraulic Swing Door Operator
Besam PowerSwing swing door operator - high performance with versatile design The versatile Besam PowerSwing swing door operator is an excellent solution for both pedestrian applications...
-
404.2.6 Doors in Series and Gates in Series
404.2.6 Doors in Series and Gates in Series....
-
404 Doors, Doorways, and Gates
404 Doors, Doorways, and Gates...
-
Besam SW200i-IG In Ground Swing Door Operator
Besam SW200i-IG in ground swing door operator - superior performance Whether you are designing a modern, architectural masterpiece or preserving the historical integrity of a building...
-
4.17.5* DOORS
Toilet stall doors shall comply with 4.13....
-
4.5.4 Gratings
If gratings have elongated openings, then they shall be placed so that the long dimension is perpendicular to the dominant direction of travel (see Fig. 8(h))....
-
4.5.4 GRATINGS
If gratings have elongated openings, then they shall be placed so that the long dimension is perpendicular to the dominant direction of travel (see Fig. 8(h))....
-
Besam SW200i-IG In Ground Swing Door Operator, Center Pivot, Double Door - BIM
-
Are closet doors and pantry doors required to comply?
Requirements for doors, doorways, and gates in §404 apply to those that provide “user passage” (§206.5). Doors serving walk-in closets or pantries must comply....
-
404.2.6 Doors in Series and Gates in Series
The distance between two hinged or pivoted doors in series and gates in series shall be 48 inches (1220 mm) minimum plus the width of doors or gates swinging into the space....
-
4.13.5 Clear Width
Doorways shall have a minimum clear opening of 32 in (815 mm) with the door open 90 degrees, measured between the face of the door and the opposite stop (see Fig. 24(a), (b), (c), and (d...
-
F206.5 Doors, Doorways, and Gates
Doors, doorways, and gates providing user passage shall be provided in accordance with F206.5....
