The ADA prohibits discrimination based on relationship or association in order to protect individuals from actions based on unfounded assumptions that their relationship to a person with...
Search Results "Edge Protection"
Filters
Commonly Searched Documents
-
Q. What is discrimination based on "relationship or association?"
-
504.5 Nosings
The radius of curvature at the leading edge of the tread shall be ½ inch (13 mm) maximum....
-
Handrail Clearance and Cross Section [§505.5, §505.7]
Handrails can have circular or non-circular cross-sections, but must have rounded edges. The gripping surface and adjacent surfaces must be free of abrasive or sharp elements....
-
Feature 2 - Routes to the Building Entrance
Ramps must also have edge protection to stop crutch and walker tips and wheelchair wheels from slipping off the sides, and level landings at the top and bottom of each segment and where...
-
Measuring Door Openings
Measure the clear door opening from the edge of the doorstop to the edge of the door (not to the door jamb)....
-
M301.4.2 Clearance Around Base
The base of the equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the examination surface...
-
M302.4.2 Clearance Around Base
The base of the equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the examination surface...
-
§ 38.125(b)(8) Platform entrance ramp
The entrance ramp, or loading-edge barrier used as a ramp, shall not exceed a slope of 1:8, when measured on level ground, for a maximum rise of 3 inches, and the transition from station...
-
§ 38.83(b)(8) Platform entrance ramp
The entrance ramp, or loading-edge barrier used as a ramp, shall not exceed a slope of 1:8 measured on level ground, for a maximum rise of 3 inches, and the transition from the station platform...
-
§ 38.95(b)(8) Platform entrance ramp
The entrance ramp, or loading-edge barrier used as a ramp, shall not exceed a slope of 1:8, when measured on level ground, for a maximum rise of 3 inches, and the transition from station...
-
Sloped Entries: ADA Standard Section 1009.3
Providing an aquatic wheelchair made of non-corrosive materials and designed for access into the water will protect the water from contamination and avoid damage to personal wheelchairs...
-
11B-232.3 Special holding cells and special housing cells
Cells subject to this requirement include, but are not limited to, those used for purposes of orientation, protective custody, administrative or disciplinary detention or segregation, detoxification...
-
2.2(b) Record of a Substantially Limiting Condition
For example: It protects people with a history of cancer, heart disease, or other debilitating illness, whose illnesses are either cured, controlled or in remission....
-
FIGURE INDEX
Maneuvering Clearances at Recessed Doors and Gates Figure 404.2.6 Doors in Series and Gates in Series Figure 405.7 Ramp Landings Figure 405.9.1 Extended Floor or Ground Surface Edge...
-
§382.19(c)(2)
(2) If you determine that the passenger does pose a direct threat, you must select the least restrictive response from the point of view of the passenger, consistent with protecting the...
-
American Dryer, Inc Wall Guard Accessory
It achieves ADA compliance and provides safety for users living with disabilities because its curved lower edge assures that the "leading edge" of the dryer-with-wall-guard unit is 26" or...
-
405 Ramps
Technical provisions address running slope, cross slope, handrails, landings, edge protection, and other elements....
-
M302.4.2 Clearance Around Base
The base of the diagnostic equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the examination...
-
M301.4.2 Clearance Around Base
The base of diagnostic equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the examination...
-
5.8.2.7 Base Support Allowance
An additional sloped region above the base support is permitted at a depth of 25 inches from the front edge of the breast platform at 1½ inches above the floor, and can extend to a height...
-
BEA Inc. EMR475 Series Door Access 4.75" Round Panther Plate (Push to Open)
plate’s surface area is optimal for bollard and wall mount applications while not detracting from the surrounding architecture 433 transmitter included in package Beveled edges...
-
BEA Inc. EMS475 Series Door Access 4.75" Square Panther Plate (Push to Open)
plate’s surface area is optimal for bollard and wall mount applications while not detracting from the surrounding architecture 433 transmitter included in package Beveled edges...
-
Inpro Corporation IPC® Designer Kickplates
Features & Benefits Add a decorative touch with designer kickplates in two styles while protecting doors from scratches and dents Achieve a finished look with factory...
-
1134A.8 Lavatories, vanities, mirrors and towel fixtures
Plumbing protection. Water supply and drain pipes under lavatories shall be insulated or otherwise covered to protect against contact....
