Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
Search Results "Designated Aisle Seat (Assembly)"
-
11B-610.4 Structural strength
-
Seat [4.21.3]
Seat [4.21.3] ADAAG specifies maximum seat dimensions. Minimum dimensions contained in the CABO-ANSI A117.1‒1992 standard are acceptable....
-
Team and Player Seating
A provision for team and player seating areas is included in the final rule (221.2.1.4)....
-
610.3.1 Rectangular Seats
The rear edge of a rectangular seat shall be 2 1/2 inches (64 mm) maximum and the front edge 15 inches (380 mm) minimum and 16 inches (405 mm) maximum from the seat wall....
-
Subpart G -- Designated Agencies
Subpart G -- Designated Agencies...
-
Subpart G -- Designated Agencies
Subpart G -- Designated Agencies...
-
Caution regarding minimum Aisle Widths for aisles that serve "elements on both sides"
The interpretation of the meaning of aisles "serving elements on both sides" might be taken by some AHJs to mean public access to aisles that have self-serve items on both sides of an aisle...
- John Hockenberry: We are all designers | TED Talks
-
10) Assembly areas
10) Assembly areas ADAAG: * Wheelchair seating: Requirements triggered in any assembly area with fixed seating that seats four or more people....
-
1607.9.2 Grab bars, shower seats and accessible benches
[DSA-AC & HCD 1-AC] See Chapter 11A, Section 1127A.4, and Chapter 11B, Sections 11B-609.8, 11B-610.4 and 11B-903.6, for grab bars, shower seats and dressing room bench seats, as applicable...
-
Designed Use
as the design driver or Designed Use. 2....
-
‘‘Designated agency.’’
‘‘Designated agency.’’...
-
Key Features of Accessible Stadiums
[See subsections ...]
-
904.3.1 Aisle
Aisles shall comply with 403....
-
904.3.1 Aisle
Aisles shall comply with 403....
-
§ 35.151(g)(1)
(1) In stadiums, arenas, and grandstands, wheelchair spaces and companion seats are dispersed to all levels that include seating served by an accessible route;...
-
4.21.3 SEAT
A seat shall be provided in shower stalls 36 in by 36 in (915 mm by 915 mm) and shall be as shown in Fig. 36....
-
Companion Seats: ADA Standard Section 1002.4.7
Where the interior width of the amusement ride is greater than 53 inches (1345 mm), seating is provided for more than one rider, and the wheelchair is not required to be centered within...
-
221.2.3.2 Vertical Dispersion
Points of entry to bleacher seating may include, but are not limited to, cross aisles, concourses, vomitories, and entrance ramps and stairs....
-
Universal Design
Universal Design—The principle that programs and facilities must be designed to be usable by all people, to the greatest extent possible, without separate or segregated access for people...
-
11B-221.2.3.2 Vertical dispersion
Points of entry to bleacher seating may include, but are not limited to, cross aisles, concourses, vomitories, and entrance ramps and stairs....
-
11B-221.2.3.2 Vertical dispersion
Points of entry to bleacher seating may include, but are not limited to, cross aisles, concourses, vomitories, and entrance ramps and stairs....
-
Designated agency
Designated agency means the Federal agency designated under subpart G of this part to oversee compliance activities under this part for particular components of State and local governments...
-
Designated agency
Designated agency means the Federal agency designated under subpart G of this part to oversee compliance activities under this part for particular components of State and local governments...