ETA Editor's Note A successful appeal does not warrant ADA compliance....
Search Results "Compliance"
-
11B-107 Special conditions appeals action
-
11B-707.3 Operable parts
Where automatic teller machines and fare machines do not require compliance with 11B-707.2, compliance with 11B-309.2 and 11B-309.3 shall not be required....
-
11B-504.5 Nosings
Exception: In existing buildings there is no requirement to retroactively alter existing nosing projections of 1½ inches (38 mm) which were constructed in compliance with the building code...
-
11B-504.5 Nosings
Exception: In existing buildings there is no requirement to retroactively alter existing nosing projections of 1½ inches (38 mm) which were constructed in compliance with the building code...
-
Are exit doors usable only in one direction required to comply on both sides?
Under the ADA Standards, compliance is not required on both sides of those doors or gates that can be used in one direction only, such as exit-only doors....
-
B. JURISDICTION
Part 35, Subpart F, to determine whether Lewisboro is in compliance with title II of the ADA and the title II DOJ Regulations, to issue findings, and, where appropriate, to negotiate and...
-
Ground Surfaces: ADA Standard Section 1008.2.6
Ground surfaces must be inspected and maintained regularly to ensure continued compliance with the ASTM F 1951 standard....
-
Technically Infeasible
essential part of the structural frame; or because other existing physical or site constraints prohibit modification or addition of elements, spaces, or features that are in full and strict compliance...
-
General: ADA Standard Section 204.1
Section 204.1 of the ADA Standards covers information on scoping requirements for protruding objects in the most current ADA Standards.
-
Break Out Opening: ADA Standard Section 404.3.6
Section 404.3.6 covers the current ADA Standards for the break out openings at swinging or sliding doors and gates.
-
11B-223.2 Hospitals, rehabilitation facilities, psychiatric facilities and detoxification facilities
All public use and common use areas shall be accessible in compliance with this chapter....
-
11B-223.2 Hospitals, rehabilitation facilities, psychiatric facilities and detoxification facilities
All public use and common use areas shall be accessible in compliance with this chapter....
-
2.2.2
2.2.2 Set requirements for independent testing agencies that may be required to perform measurement for compliance....
-
§ 37.135(c)(2)
(2) In the event of any change in circumstances that results in an entity which has submitted a certification of continued compliance falling short of compliance with §§37.121-37.133, the...
-
11B-707.3 Operable parts
Where automatic teller machines and fare machines do not require compliance with 11B-707.2, compliance with 11B-309.2 and 11B-309.3 shall not be required. 3....
-
Oasis Apron Kit, Sandstone
The apron will give ADA compliance when installed below the upper unit....
-
SafePath Courtedge™ Reducer Ramps
installation of raised wood floors, especially in retrofit and replacement projects, are problematic when faced with interpreting federal and state ADA (Americans with Disabilities Act) access compliance...
-
Technical Memorandum TM 2013-22 Storage (Kitchens and Kitchenettes)
.* For purposes of compliance with TAS 804.5, a kitchen or kitchenette is any subject room or space that has fixed or built-in cooking facilities....
-
§ 37.21(b)
(b) For entities receiving Federal financial assistance from the Department of Transportation, compliance with applicable requirements of this part is a condition of compliance with section...
-
ADA One
Our services reflect our practical knowledge and insights into federal expectations for compliance....
-
10.4.1(4)
(4) Where public pay telephones are provided, and at least one is at an interior location, a public text telephone shall be provided in compliance with 4.31.9....
-
CHAPTER 9 FIRE PROTECTION AND LIFE SAFETY SYSTEMS
ETA Editor's Note Sections from California Building Code Chapter 9 that are not adopted by Division of the State Architect - Access Compliance (DSA-AC) have been omitted....
-
11B-1008.2.6 Ground surfaces
Ground surfaces must be inspected and maintained regularly to ensure continued compliance with the ASTM F 1951 standard....
-
11B-809.4.1 Subsequent bathrooms
In residential dwelling units with more than one bathroom, when a bathtub is installed in the first bathroom in compliance with Section 11B-809.4 and a shower compartment is provided in...
