This section requires use of the 60 in (1525 mm) standard stall (Figure 30(a)) and permits the 36 in (915 mm) or 48 in (1220 mm) wide alternate stall (Figure 30(b)) only in...
Search Results "Compartment Hardware"
Filters
Commonly Searched Documents
-
A4.17.3 Size and Arrangement
-
Scranton Toilet Partitions: Eclipse - Floor Mount Headrail
3D Rendering of Eclipse Toilet Partition
-
Figure 604.2 Water Closet Location – Drawing from the U.S. Access Board
-
Sargent 7800 Mortise Lock with Push/Pull Trim Hardware
The Push/Pull design commonly known for its ease of operation is coupled with the strength and integrity of a mortise lock to provide greater versatility. The PT 7800 is perfect for...
-
Sargent 7900 Mortise Lock Door Hardware
The SARGENT 7900 Series Mortise Locks provide a quality Grade 1 lock ideal for schools, apartment housing and commercial buildings. Certified to ANSI/BHMA Grade 1 standards and UL...
-
Sargent 6500 Line Lever Hardware with Lockset
The SARGENT 6500 Line is a standard duty key-in-lever lock designed to exceed the requirements of ANSI A156.2 Series 4000 Grade 2. Specifications For Doors: 1-3/8" (35mm)...
-
HEWI Range 180 Glass Door Hardware
Real materials lend Range 180 enhanced value. The lever handles are made of solid stainless steel and can be optionally complemented with slate or glass elements. Range 180 includes...
-
Door stop
[See subsections ...]
-
4.13.12* Automatic Doors and Power-Assisted Doors
If an automatic door is used, then it shall comply with ANSI/BHMA A156.10‒1985. Slowly opening, low-powered, automatic doors shall comply with ANSI A156.19‒1984. Such doors shall not...
-
Willoughby Industries ADA Cabinet Shower US-FA-HC
Cabinet shower shall be: Willoughby Model No. S- 3636-HC. Shower cabinet shall be fabricated from 14 gauge, type 304 stainless steel. Shower floor shall be fabricated from 11 gauge,...
-
SafePath SafeShower™ Ramp Transitions
SafePathTM Products offers SafeShowerTM ramps and transitions for showers that require edge treatment or transitional elements for showers, walk-in showers/tubs and steam showers....
-
Willoughby Industries US-HC Cabinet Shower
Willoughby Model No. S-3636-HC Accessible cabinet shower (select from model number and options list on next page) Shower cabinet shall be fabricated from 14 gauge, type 304 stainless...
-
Architectural Builders Hardware Mfg., Inc. 6000 Series Push/Pull Hospital Latch
The 6000 Series Push/Pull Hospital Latch offers versatility and durability for commercial and institutional settings. These models are designed for commercial and institutional doors...
-
17.1 Q. Is it correct that only the exterior side of the main entry door of covered multifamily dwellings must meet the ANSI requirements?
These specifications include necessary maneuvering clearances and accessible door hardware....
-
Boost Your Business - Chapter 10 - Restroom Fixtures
Boost Your Business - Chapter 10 - Restroom Fixtures
-
BEST Door Lever Hardware Cylindrical Locks - 7KC
Features: Versatile trims & finishes available. Cylindrical chassis to fit common door preparation. Standard and Drive-in latches available. Through-bolt mounting...
-
BEST Door Lever Hardware Cylindrical Locks - 9K
The 9K Cylindrical Lock Offers Simple, Safe and Dependable Protection. The BEST 9K is the toughest cylindrical lock, built to deliver dependable use and superior security in a wide...
-
H27
H27. Does this 36-inch wide stall have horizontal grab bars on both of the side partitions that are at least 36 inches long and 33 to 36 inches above the floor? [ADA Standards §...
-
C. Accessibility Within Toilet Rooms
C. Accessibility Within Toilet Rooms C1-a. Is there an area within the toilet room where a person who uses a wheelchair or mobility device can turn around - either a minimum...
-
11B-809.10.6.2 Slope
The slope of the shower floor shall be 1/2 inch (12.7 mm) per foot maximum in any direction and shall slope to a drain. The floor surfaces shall be of Carborundum, grit-faced tile or...
-
11B-809.10.6.6 Controls
Controls and operating mechanisms shall comply with Section 11B-309.4.
-
11B-809.10.6.7 Shower enclosures
Doors and panels of shower enclosures shall comply with Section 11B-809.10.5.4.
-
Architectural Builders Hardware Mfg., Inc. 6000 Series Wide Paddle Cylindrical Hospital Latch
LR6000 Hospital Latch Wide Paddle Cylindrical Hospital Latch 1-3/4" standard door thickness (specify if different) Meets ADA requirements
-
Access Board: Shower Seats
This video is part of a longer animation produced by the U.S. Access Board. View the animation video in its entirety on the Access Board's website...
