5.3.2 Transfer Sides Recommendations for M301 Description: The transfer side provision requires the transfer surface to be located to provide options to transfer onto the short...
Search Results "Braille Position"
-
5.3.2 Transfer Sides Recommendations for M301
-
M301.3.1 Transfer Supports
Transfer supports shall be provided for use with the transfer sides required by M301.2.3 and shall comply with M305.2.
-
M301.3 Supports
Transfer supports, stirrups, and reclining surfaces shall comply with M301.3.
-
M304.2.2 Standing Supports (Section-by-Section Analysis)
The MDE NPRM proposed requiring standing supports on each side of the standing surface of diagnostic equipment used by patients in the standing position, and compliance with the technical...
-
Figure M4: Overview of M303 Diagnostic Equipment for Use by a Patient While Seated in a Wheelchair and M304 Diagnostic Equipment for Use by a Patient in a Standing Position (Weight Scale Example)
Where the primary use of the equipment supports more than one patient position, it must comply with the requirements for each use. ...
-
M304.2.2 Standing Supports
be permitted to provide one standing support on one side of the standing surface provided that the standing support complies with the requirements for standing supports in a horizontal position...
-
4.10.12(2)
(2) Tactile, Braille, and Visual Control Indicators....
-
d. Unobstructed Transfer
The final rule retains the proposed requirements for unobstructed transfer for diagnostic equipment used in a supine, prone, or side-lying position, as well as diagnostic equipment used...
-
407.2.3.1 Floor Designation
Floor designations shall be provided in both tactile characters and braille. Tactile characters shall be 2 inches (51 mm) high minimum....
-
M301.2.3.1 End Transfer Surface
End transfer surfaces shall be 28 inches (710 mm) wide minimum and 17 inches (430 mm) long minimum. EXCEPTION: Transfer surfaces for imaging equipment with bores shall be...
-
M301.2.3.2 Side Transfer Surface
Side transfer surfaces shall be 28 inches (710 mm) wide minimum and 28 inches (710 mm) long minimum. EXCEPTION: Transfer surfaces for imaging equipment with bores shall be...
-
M301.2.4 Unobstructed Transfer
Each transfer surface shall provide two unobstructed sides for patient transfer. EXCEPTIONS: 1. Obstructions no more than 3 inches (75 mm) deep shall be permitted to extend beyond...
-
M301.2.4 Unobstructed Transfer (Section-by-Section Analysis)
In the MDE NPRM the Access Board proposed that each transfer side provide unobstructed access to the transfer surface, with an exception to permit temporary obstructions as long as...
-
M301.2.3 Transfer Sides
The transfer surface shall be located to provide options to transfer from a mobility device onto one short side (depth) and one long side (width) of the surface. Each transfer side...
-
11B-220.1.2 Two automatic teller machines or fare machines
707.8 and one shall comply with Sections 11B-707.3 _|Operable Parts|_, 11B-707.4 _|Privacy|_, 11B-707.5 _|Speech Output|_, 11B-707.6 _|Input|_, 11B-707.7.2 _|Characters|_ and 11B-707.8 _|Braille...
-
11B-608.6 Shower spray unit and water
A shower spray unit with a hose 59 inches (1499 mm) long minimum that can be used both as a fixed-position shower head and as a hand-held shower shall be provided....
-
11B-608.6 Shower spray unit and water
A shower spray unit with a hose 59 inches (1499 mm) long minimum that can be used both as a fixed-position shower head and as a hand-held shower shall be provided....
-
407.2.3.1 Floor Designation
Floor designations shall be provided in both tactile characters and braille. Tactile characters shall be 2 inches (51 mm) high minimum....
-
11B-220.1.2 Two automatic teller machines or fare machines
11B-309 _|Operable Parts|_, 11B-707.2 _|Clear Floor or Ground Space|_, 11B-707.4 _|Privacy|_, 11B-707.5 _|Speech Output|_, 11B-707.6 _|Input|_, 11B-707.7.2 _|Characters|_ and 11B-707.8 _|Braille...
-
5.2.3 Transfer Surface Measurement Recommendation for M301 and M302
The transfer surface dimensions do not include headrests, footrests, or similar supports for body extremities that do not support the patient’s overall body position....
-
407.2.3.1 Floor Designation
Floor designations shall be provided in both tactile characters and braille. Tactile characters shall be 2 inches (51 mm) high minimum....
-
Rockwood Manufacturing Company BF687 BF Series Men's ADA Toilet Room Sign
FEATURES: Plastic Signs • Raised characters and Grade 2 Braille translation. • Meets ADAAG Section 4.30 requirements. Metal Signs • Raised black lettering....
-
Rockwood Manufacturing Company BF688 BF Series Women's ADA Toilet Room Sign
FEATURES: Plastic Signs • Raised characters and Grade 2 Braille translation. • Meets ADAAG Section 4.30 requirements. Metal Signs • Raised black lettering....
-
Rockwood Manufacturing Company BF689 BF Series Unisex ADA Toilet Room Sign
FEATURES: Plastic Signs • Raised characters and Grade 2 Braille translation. • Meets ADAAG Section 4.30 requirements. Metal Signs • Raised black lettering....
