Pictograms shall have a field height of 6 inches (152 mm) minimum. Characters and Braille shall not be located in the pictogram field. Advisory 11B-703.6.1 Pictogram field....
Search Results "Transfer Surface Height"
-
11B-703.6.1 Pictogram field
-
1.1.7.3.1 Detached one- and two-family dwellings
Detached one- and two-family dwellings, efficiency dwelling units, lodging houses, live/work units, townhouses not more than three stories above grade plane in height with a separate means...
-
11B-707.9.1.1 Tactilely discernible numerical keypad
A tactilely discernible numerical keypad similar to a telephone keypad containing a raised dot with a dot base diameter between 1.5 mm and 1.6 mm and a height between 0.6 mm and 0.9 mm on...
-
Providing Comforts and Conveniences—Constructed Features
However, if the ground under the element isn't changed, this work doesn't trigger the surface and slope requirements for clear floor and ground space....
-
Trends that Enhance or Hinder Accessibility
service can limit access: popular large furniture, such as armoires, may take up valuable maneuvering space in accessible rooms, and plush, pillow-top mattresses may make beds too high to transfer...
-
§8.50(c)(3)
or otherwise encumber the real property as security for financing construction of new, or improvement of existing, facilities on the property for the purposes for which the property was transferred...
-
§104.5(c)(3)
or otherwise encumber the real property as security for financing construction of new, or improvement of existing, facilities on the property for the purposes for which the property was transferred...
-
Clear Floor Space [4.20.2]
For seats at the head of the tub, consider additional clear floor space to allow positioning for side transfers....
-
Visual Characters
Section 703.5 provides specifications for visual characters which address finish and contrast, case, style, character proportions and height, height, stroke thickness, and character and...
-
M303.3.3 Ramped (Section-by-Section Analysis)
The commenter, a medical association, concurred with the requirement for handrails on diagnostic equipment with ramps over six inches in height....
-
1133B.2.5.2
ETA Editor's Note The requirements of 2010 CBC 1133B.2.5.2 are more stringent than 1991 ADAAG 4.13.9 regarding hardware mounting height. ...
-
NPRM
In level-entry boarding, the height of the platform and the door height of the passenger car are aligned so that a passenger using a wheelchair can seamlessly move from one to the other...
-
1.1.17 Stairs
Measure cast - in - place stairs for both riser height and tread depth of each riser and tread....
-
11B-809.10.7.3 Reinforcement for grab bars
The grab bar reinforcement shall be 8 inches (203 mm) minimum in height. The backing shall 40 (sic) inches (1016 mm) minimum in length....
-
Walk
An exterior prepared surface for pedestrian use, including pedestrian areas such as plazas and courts....
-
705.1 General
Detectable warnings shall consist of a surface of truncated domes and shall comply with 705....
-
Ramp
Ramp - A walking surface that has a running slope of greater than 1:20....
-
Grade Break
The line where two surface planes with different grades meet....
-
Ramp
A walking surface that has a running slope steeper than 1:20....
-
Transition Plate
A sloping pedestrian walking surface located at the end(s) of a gangway....
-
6b.
Is the change in level from the floor to the lift surface ramped or beveled? Yes _____ No _____...
-
106.5.76 Walk
An exterior prepared surface for pedestrian use, including pedestrian areas such as plazas and courts....
-
4.9.6 Outdoor Conditions
Outdoor stairs and their approaches shall be designed so that water will not accumulate on walking surfaces....
-
Clear Tread Width
The width of the usable trail tread and adjacent usable surface....