For accessible seating in a designated wheelchair area, a public accommodation shall provide up to three companion seats for each person with a disability who requires a wheelchair space...
Search Results "Sloped Area"
-
§ 36.302(f)(9)(i)
-
§ 35.138(i)(1)
For accessible seating in a designated wheelchair area, a public entity shall provide up to three companion seats for each person with a disability who requires a wheelchair space, provided...
-
Accessible Routes to Programs and Services
The accessible route should be the same, or be located in the same area as, the general route used by people without mobility disabilities....
-
11B-602.9 Pedestrian protection
The protected area within which a drinking fountain is located shall be 32 inches (813 mm) wide minimum and 18 inches (457 mm) deep minimum, and shall comply with Section 11B-305.7....
-
1.1.3 Scope
In alteration projects, these provisions apply to the area of new work, and include the path of travel requirements found in Section 11B-202.4....
-
Safety Considerations for Site Selection
Evacuation will be easier and safer, if needed, as this allows many people with disabilities to travel unassisted on evacuation paths to a safe area outside....
-
Vertical Clearance [4.6.5]
Recommendation: Directional signage, including that at entrances, can be very helpful, especially where van spaces are located in one area only....
-
Angled (Front-In) Parking
Recommendation: Where possible, locate accessible spaces in areas where drivers have the option of backing in or consider providing an access aisle at each space so that in series an aisle...
-
2. a. iv. Path-of-Travel (wheelchair) space allowances
If a 180° turn is needed to exit an area, then a 60” diameter turning space or a 36” wide "T" is needed (see Figure 11)....
-
A trailhead
is a site designed and developed by the Forest Service or other Government agency, a trail association, trail maintaining club, trail partner, or other cooperators to provide a staging area...
-
Costs of Speech-To-Text Services
The skill and availability of service providers and the area where the meeting will be held can all affect the rates for these services....
-
1.1.3 Scope
In alteration projects, these provisions apply to the area of new work, and include the path of travel requirements found in Section 11B-202.4.◼...
-
1.1.3 Scope
In alteration projects, these provisions apply to the area of new work, and include the path of travel requirements found in Section 11B-202.4. ◼...
-
11B-602.9 Pedestrian protection
The protected area within which a drinking fountain is located shall be 32 inches (813 mm) wide minimum and 18 inches (457 mm) deep minimum, and shall comply with Section 11B-305.7....
-
806.2.4 Toilet and Bathing Facilities
Toilet and bathing fixtures required to comply with 603 through 610 shall be permitted to be located in more than one toilet or bathing area, provided that travel between fixtures does not...
-
505.10 Handrail Extensions
In assembly areas, extensions shall not be required for ramp handrails in aisles serving seating where the handrails are discontinuous to provide access to seating and to permit crossovers...
-
407.2.2.1 Visible and Audible Signals
Where in-car signals are provided, they shall be visible from the floor area adjacent to the hall call buttons. EXCEPTIONS: 1....
-
221.8 Temporary Platforms or Other Movable Structures
located on (or obstructed by) temporary platforms or other movable structures, except that when an entire seating section is placed on temporary platforms or other movable structures in an area...
-
1150A.1 General
Test No. 1 -- Individual Building Test may only be used if the site has terrain over 15 percent slope. Test No. 3 -- Unusual Characteristics Test may be used if applicable....
-
11B-604.3.2 Overlap
2-11B, dated 9/9/14, which includes the following interpretation of Subsection 11B-604.3.2: Showers are fixtures including a 30 inch x 60 inch clear receptor with a minimum/maximum slope...
-
2. a. i. Accessible parking
Note: for more information on parking and loading specifications including diagrams, slope requirements, location, and signage, refer to ADAAG Section 4.6 Parking and Passenger Loading Zones...
-
3. Terminology
planar surface with characteristics dimensions that affect vehicle dynamics, ride quality, dynamic loads, and drainage, for example, longitudinal profile, transverse profile, and cross slope...
-
Selection of Methodology
stabilizer, etc.) information (product type, manufacturer name, warranty/guarantees’ information, and similar data) SECTION #3 Trail pre‐installation specifications (soil type/composition, slope...
-
1150A.1 General
Test No. 1 -- Individual Building Test may only be used if the site has terrain over 15 percent slope. Test No. 3 -- Unusual Characteristics Test may be used if applicable....