ETA Editor’s Note: The prior standards allowed construction tolerances to occur on either side of an 18” absolute dimension....
Search Results "Electroacoustic Performance Standards"
Filters
Commonly Searched Documents
-
604.2 Location
-
Design Guidelines for Environmental Illness
There is no statutory authority for the Department to create the type of design and construction standards suggested by the commenters....
-
Section 1. Introduction
Additionally, Section 1 explains that only those sections of the ANSI Standard cited in the Guidelines are required for compliance with the accessibility requirements of the Fair Housing...
-
PLANNING FOR SUCCESS
And officials should be familiar with the 2010 Standards before undertaking any alterations or new construction projects....
-
806.3 Guest Rooms with Communication Features
For headset or external amplification system compatibility, a standard subminiature jack installed in the telephone will provide the most flexibility....
-
Accessibility Evaluation Surveys
During an accessibility evaluation survey, compare each portion of a structure to the accessibility standards, and record compliance and deficiencies....
-
402.2 Speech-Output Enabled
Speech output shall be delivered through a mechanism that is readily available to all users, including, but not limited to, an industry standard connector or a telephone handset....
-
The National Shelter System and Physical Accessibility - Time to Look Under the Hood
What follows is a list of questions and concerns regarding NSS’s information accuracy, surveyor competencies, and uniformity in applying standardized policies and procedures across divisions...
-
FAQ: Why should I enter keywords in my Voices post?
post is integrated with Corada’s existing database of other accessibility-related material, so your question, comment, Opinion or Interpretation will be in context with applicable federal standards...
-
Alterations Affecting Primary Function Areas [§202.4]
DOJ’s 2010 ADA Standards and DOT’s ADA regulations contain detailed provisions on alterations to primary function areas that must be applied in addition to section 202.4....
-
1.1.16 Alternate measurement tools
The waviness index method is described in ASTM E 1486, Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria....
-
Are accessible parking spaces required on a site where valet service is provided but vehicles are parked off site, such as in a public parking garage or on public streets?
Public garages and other parking facilities subject to the Standards must comply and provide accessible parking spaces in any case....
-
Head and Back Support (M301.3.3 and M302.3.3)
Although not required by the proposed standards, examination tables that can be adjusted to a sitting position and then reclined to a horizontal position may be easier for patients with...
-
Telecommunications Relay Services (TRS) (Advisory Guidance)
TRS links TTY users with those who do not have a TTY and use standard telephones....
-
Error/Omission: Adequate maneuvering clearance is not provided at doors, including doors to accessible toilet stalls.
* Asterisk denotes that related, non-mandatory material is in the Appendix to the Standards....
-
Error/Omission: Parts of an accessible route with slopes that exceed 1:20 lack required features including handrails and edge protection.
* Asterisk denotes that related, non-mandatory material is in the Appendix to the Standards....
-
Error/Omission: The shape of the door hardware requires tight grasping, pinching, and twisting of the wrist to use.
* Asterisk denotes that related, non-mandatory material is in the Appendix to the Standards....
-
Section 35.151(b)(3) Alterations to historic facilities (Section-by-Section Analysis)
Currently, the regulation provides that alterations to historic facilities shall comply to the maximum extent feasible with section 4.1.7 of UFAS or section 4.1.7 of the 1991 Standards....
-
11B-216.7 Elevators
Existing buildings that have been remodeled to provide specific elevators for public use that comply with these building standards shall have the location of and the directions to these...
-
11B-810.2.2 Dimensions
Access Board's Note to Reader: The Department of Transportation's ADA Standards indicate that compliance is required to the extent construction specifications are within a public entity's...
-
General Provisions
All fixed route operators providing complementary paratransit must make service available at least to individuals meeting these standards....
-
11B-707 Automatic teller machines, fare machines and point-of-sale devices
Federal procurement law requires that ITMs purchased by the Federal government comply with standards issued by the Access Board under Section 508 of the Rehabilitation Act of 1973, as amended...
-
11B-806.3 Guest rooms with communication features
For headset or external amplification system compatibility, a standard subminiature jack installed in the telephone will provide the most flexibility....
-
WHEELCHAIR
A chair mounted on wheels to be propelled by its occupant manually or with the aid of electric power, of a size and configuration conforming to the recognized standard models of the trade...