Spaces and elements located on a level not required to be served by an accessible route must fully comply with this chapter....
Search Results "Clear Ground Space"
-
11B-206.2.3 Multi-story buildings and facilities
-
B. Slopes
____________________________________ ...do the interior ramps have top, middle and bottom landings that are level and at least 60" long to allow for adequate maneuvering and resting space...
-
C) Accessible Entrance
The accessible entrance must also connect to an interior accessible route leading to the space or spaces where the program is located....
-
11B-408.4.1 Car dimensions and doors
Elevator cars shall provide a clear width 42 inches (1067 mm) minimum and a clear depth 54 inches (1372 mm) minimum....
-
11B-408.4.1 Car dimensions and doors
Elevator cars shall provide a clear width 42 inches (1067 mm) minimum and a clear depth 54 inches (1372 mm) minimum....
-
1132A.5.1 General
Section 1126A.3 shall apply to maneuvering clearances at the side of the door exposed to common or public use spaces. ...
-
11B-1005.3 Edge protection
platform 12 inches (305 mm) where the 34 inch (865 mm) high railing is provided is an alternative design, permitting individuals using wheelchairs or other mobility devices to pull into a clear...
-
11B-1005.3 Edge protection
platform 12 inches (305 mm) where the 34 inch (865 mm) high railing is provided is an alternative design, permitting individuals using wheelchairs or other mobility devices to pull into a clear...
-
11B-1005.3 Edge protection
platform 12 inches (305 mm) where the 34 inch (865 mm) high railing is provided is an alternative design, permitting individuals using wheelchairs or other mobility devices to pull into a clear...
-
1133B.2.4.2
Minimum maneuvering clearances at doors shall be as shown in Figures11B-26A,11B-26B and11B-26C.The floor or ground area within the required clearances shall be level and clear....
-
11B-809.1.2 Viewing devices
door to a residential dwelling units with mobility features shall also provide a lower viewing device 42 inches (1067 mm) minimum and 43 inches (1092 mm) maximum above the finish floor or ground...
-
11B-1008.2.5.2 Elevated
ETA Editor's Note The above restrictions on ramp slope for ramps connecting ground level play components, and on ramp rise for ramps connecting elevated play components, are more stringent...
-
11B-407.2.2.2 Visible signals
Visible signal fixtures shall be centered at 72 inches (1829 mm) minimum above the finish floor or ground....
-
11B-1008.2.5.2 Elevated
ETA Editor's Note The above restrictions on ramp slope for ramps connecting ground level play components, and on ramp rise for ramps connecting elevated play components, are more stringent...
-
11B-407.2.2.2 Visible signals
Visible signal fixtures shall be centered at 72 inches (1829 mm) minimum above the finish floor or ground....
-
STEP 3 Compare which is greater
STEP 3 Compare which is greater Step 3 compares your results in identifying the number and different types of ground level play components with those required by Table 240.2.1.2. ...
-
LaCantina Multi-slide Thermally Controlled Aluminum Sliding Door System
0.59 E272-Air-Clear 1 1/16" 0.48 0.32 0.53 E270-Air-Clear 1 1/16"...
-
Door and Gate Hardware: ADA Standard Section 404.2.7
Section 404.2.7 covers the current ADA Standards for door and gate hardware.
-
Service Counters
A 30”x48” clear space is required immediately adjacent to the counter length for a parallel approach (A forward approach option is also available in 11B-904.4.2)....
-
Auditorium accessible seating
Graphically one wheelchair floor space takes up two rows so you are probably looking at a 60” deep floor space. ...
-
Hager Companies Door Protection Plate 204S
Door Protection Plate 204S 0.125" gauge with 4-sided bevel Material: - Clear Plastic...
-
Accessible Routes to Press Boxes
Such structures, which can be prefabricated, are significantly elevated above ground. Some are located at the top of bleachers....
-
LaCantina Multi-slide Aluminum Wood Sliding Door System
0.56 E240-Air-Clear 3/4" 0.47 0.20 0.28 E272-Air-Clear 3/4"...
