(1) A POC, a ventilator, a respirator or a continuous positive airway pressure machine that displays a manufacturer's label according to FAA requirements in circumstances where requirements...
Search Results "Technical Requirement"
-
§382.133(d)(1)
-
11B-405.1 General
Exception: In assembly areas, aisle ramps adjacent to seating and not serving elements required to be on an accessible route shall not be required to comply with Section 11B-405....
-
OCCUPANT NOTIFICATION SYSTEMS
No Special Requirements. People with a speech disability can hear standard alarms and voice announcements and can see visual indicators that warn of danger and the need to evacuate....
-
R403.4 Operation
Operable parts shall be operable with one hand and shall not require tight grasping,pinching, or twisting of the wrist....
-
§ 36.304(d)(2) Safe harbor
Elements in existing facilities that are not altered after [insert effective date of final rule], and that comply with the 1991 Standards, are not required to be modified in order to comply...
-
407.6 Operation
At least one mode of operation shall be operable with one hand and shall not require tight grasping, pinching, or twisting of the wrist....
-
C206.1 General (Section-by-Section Analysis)
C206.1 General (Section-by-Section Analysis) This section proposes to require that where support documentation or services are provided, they must conform to the proposed provisions of...
-
407.9 Operation
At least one mode of operation shall be operable with one hand and shall not require tight grasping, pinching, or twisting of the wrist....
-
2.1.3
2.1.3 State requirements for critical accumulated tolerances....
-
§1193.41(g) Operable without time-dependent controls
Provide at least one mode that does not require a response time. Alternatively, a response time may be required if it can be by-passed or adjusted by the user over a wide range....
-
11B-405.1 General
Exception: In assembly areas, aisle ramps adjacent to seating and not serving elements required to be on an accessible route shall not be required to comply with Section 11B-405....
-
11B-812.8.2 Five to twenty-five
The required standard accessible EVCS shall not be required to be identified with an ISA....
-
11B-812.8.2 Five to twenty-five
The required standard accessible EVCS shall not be required to be identified with an ISA....
-
11B-405.1 General
Exception: In assembly areas, aisle ramps adjacent to seating and not serving elements required to be on an accessible route shall not be required to comply with Section 11B-405....
-
ADA25: #9 of 25 -- Hospital: Interpreters
Often the medical team needs information - and this requires communication....
-
Section 35.151(b) Alterations
Proposed Sec. 35.151(b)(4) contained the requirements for path of travel....
-
Application of ADA to places of lodging that contain individually owned units. (Section-by-Section Analysis)
A number of commenters expressed concerns about the ability of the Department to require owners of accessible units to participate in the rental program, to require developers, condo associations...
-
Transfer Steps: ADA Standard Section 1009.5.4
Where possible, the height of the transfer step should be minimized to decrease the distance an individual is required to lift up or move down to reach the next step to gain access....
-
Height: ADA Standard Section 1005.2.1
or sections 1012.2 and 1012.3 of the International Building Code (2003 edition) (incorporated by reference, see “Referenced Standards” in Chapter 1) is provided, the guard shall not be required...
-
Clearance: ADA Standard Section 804.2
EXCEPTION: Spaces that do not provide a cooktop or conventional range shall not be required to comply with 804.2. Advisory 804.2 Clearance....
-
Assembly Area
For the purposes of these requirements, assembly areas include, but are not limited to, classrooms, lecture halls, courtrooms, public meeting rooms, public hearing rooms, legislative chambers...
-
11B-809.9.4 Work surfaces
Work surfaces shall be 36 inches (914 mm) maximum above the finish floor with minimum lengths at the following locations as required by this section: Linear length of 30 inches...
-
11B-809.9.1 Clear floor space
For a parallel or forward approach to the sink and to the work surface required by Sections 11B-809.9.3 and 11B-809.9.4....
-
11B-703.7.2.6.1 Men’s toilet and bathing facilities
Exception: Within secure perimeter of detention and correctional facilities, geometric symbols shall not be required to be ¼ inch (6.4 mm) thick....