Striping complying with Section 11B-504.4.1 shall be provided at each transfer step....
Search Results "Transfer Access"
-
11B-1008.3.2.4 Contrasting stripe
-
5.1 Transfer Surface Height Recommendations
5.1 Transfer Surface Height Recommendations Description: The transfer height is set above the finished floor surface to permit transfers form mobility devices onto the transfer surface...
-
Can an operator require a person to transfer from a wheelchair to a vehicle seat?
Section 37.165(e) of the DOT ADA regulations allows persons who use wheelchairs to transfer to a vehicle seat, if one is available....
-
Can an operator require a person to transfer from a wheelchair to a vehicle seat?
Section 37.165(e) of the DOT ADA regulations allows persons who use wheelchairs to transfer to a vehicle seat, if one is available....
-
5.2.2.2 Transfer Surface Depth Recommendation for M302
5.2.2.2 Transfer Surface Depth Recommendation for M302 The Committee recommends a minimum depth requirement of 17 inches for equipment used by patients in seated positions....
-
ACCESSIBLE SPACE
[DSA-AC] A space that complies with the accessibility provisions of this code....
-
ACCESSIBLE SPACE
[DSA-AC] A space that complies with the accessibility provisions of this code....
-
3. Are ramps, transfer systems, and stairs permitted to be counted as play components?
Are ramps, transfer systems, and stairs permitted to be counted as play components? No....
-
Width and Length
Width and Length Transfer walls must be a minimum of 12 inches wide to a maximum of 16 inches wide....
-
1b
Do they have a fixed or folding seat between 17"-19" above the floor, onto which a person who uses a wheelchair may transfer to shower?...
-
F206.2.8 Amusement Rides
Amusement rides required to comply with F234 shall provide accessible routes in accordance with F206.2.8....
-
206.2.9 Amusement Rides
Amusement rides required to comply with 234 shall provide accessible routes in accordance with 206.2.9....
-
5.2.3 Transfer Surface Measurement
5.2.3 Transfer Surface Measurement. The transfer surface should be measured from the center-point of each side of the transfer surface....
-
206.2.9 Amusement Rides
Amusement rides required to comply with 234 shall provide accessible routes in accordance with 206.2.9....
-
11B-206.2.9 Amusement rides
Amusement rides required to comply with Section 11B-234 shall provide accessible routes in accordance with Section 11B-206.2.9....
-
11B-206.2.9 Amusement rides
Amusement rides required to comply with Section 11B-234 shall provide accessible routes in accordance with Section 11B-206.2.9....
-
11B-206.2.9 Amusement rides
Amusement rides required to comply with Section 11B-234 shall provide accessible routes in accordance with Section 11B-206.2.9....
-
1i
Are all of the small showers free of curbs or lips greater than 1/2" high at the shower floor that would impede wheelchair approach and transfer onto the folding shower seat?...
-
International Symbol of Accessibility: ADA Standard Section 703.7.2.1
The International Symbol of Accessibility shall comply with Figure 703.7.2.1....
-
5.3.2 Transfer Sides Recommendations for M301
5.3.2 Transfer Sides Recommendations for M301 Description: The transfer side provision requires the transfer surface to be located to provide options to transfer onto the short side and...
-
1014.2.1.1.2 Slope
The slope of the surface of the clear ground space shall not be steeper than 1:48 in any direction. EXCEPTION: Where the surface is other than asphalt, concrete, or boards, slopes...
-
1014.2.1.1.2 Slope
The slope of the surface of the clear ground space shall not be steeper than 1:48 in any direction. EXCEPTION: Where the surface is other than asphalt, concrete, or boards, slopes...
-
5.2.2.1 Transfer Surface Width Recommendations for M302
5.2.2.1 Transfer Surface Width Recommendations for M302 The Committee recommends 21 inches for the minimum width of the transfer surface of examination chairs and other equipment primarily...
-
608.5.1 Transfer Type Shower Compartments
608.5.1 Transfer Type Shower Compartments....