(2) Controls—
Search Results "Stair Lift"
Filters
Commonly Searched Documents
-
§ 38.23(b)(2) Controls
-
§ 38.23(b)(4) Power or equipment failure
(4) Power or equipment failure. Platforms stowed in a vertical position, and deployed platforms when occupied, shall have provisions to prevent their deploying, falling, or folding...
-
1009.2.4 Seat Height
The height of the lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the...
-
4. My pool already existed before the effective date of the new rule. What am I required to do to provide pool access to customers with mobility disabilities?
The 2010 Standards for pool lifts require lifts to be fixed and to meet additional requirements for location, size of the seat, lifting capacity, and clear floor space....
-
American Safety Tread Co., Type G505R Stairway Nosing/Tread Replacement
Manufactured of heat treated extruded aluminum alloy 6063-T-6, filled with a mixture of virgin aluminum oxide and silicon carbide abrasive granules in an epoxy binder. Type...
-
§ 38.83(b)(9) Platform deflection
The lift platform (not including the entrance ramp) shall not deflect more than 3 degrees (exclusive of vehicle roll) in any direction between its unloaded position and its position when...
-
Section H: Lifts
Yes No N/A Comments/Remedies H1 Is the lift operational at the time of the survey?...
-
§ 38.23(b)(10) Platform movement
No part of the platform shall move at a rate exceeding 6 inches/second during lowering and lifting an occupant, and shall not exceed 12 inches/second during deploying or stowing....
-
§ 38.83(b)(10) Platform movement
No part of the platform shall move at a rate exceeding 6 inches/second during lowering and lifting an occupant, and shall not exceed 12 inches/second during deploying or stowing....
-
Can guards or collars be attached to handrails to prevent skateboard traffic?
No, handrail gripping surfaces at egress stairs subject to the Standards must be unobstructed on the top and sides and free of sharp or abrasive elements so that users can maintain a continuous...
-
11B-1009.2.4 Seat
The height of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the...
-
Hill-Rom Liko® M220 / M230 Mobile Lift, Senior Video
Video shows Liko® M220 / M230 Mobile Lift being used to lift a person who had fallen to the floor....
-
Wheelchair Spaces: ADA Standard Section 206.7.2
Section 206.7.2 covers scoping requirements in the most current ADA Standards for accessible routes to wheelchair spaces.
-
6a.
Is the lift operational at the time of the survey? Yes _____ No _____...
-
11B-206.7.2 Wheelchair spaces
Platform lifts shall be permitted to provide an accessible route to comply with the wheelchair space dispersion and line-of-sight requirements of Sections 11B-221 and 11B-802....
-
410.2 Floor Surfaces
Floor surfaces in platform lifts shall comply with 302 and 303....
-
410.2 Floor Surfaces
Floor surfaces in platform lifts shall comply with 302 and 303....
-
Guldmann GH3 Ceiling Lift System
How to use the Guldmann GH3 ceiling lift. Read more at http://www.guldmann.net/ceiling-lifts. Watch more videos on http://www.youtube.com/vguldmann...
-
Hill-Rom Liko® M220 / M230 Mobile Lift, Pediatric Video
This video shows the Hill-Rom Liko® M220 / M230 Mobile Lift being used to lift and maneuver a child from a bed to another location....
-
E1-f
If a wheelchair lift is provided, does it meet the following? Yes No...
-
f-i
Is the lift operational at the time of the survey? [ADA Standards § 4.11.3] Yes No...
-
6b.
Is the change in level from the floor to the lift surface ramped or beveled? Yes _____ No _____...
-
410.2 Floor Surfaces
Floor surfaces in platform lifts shall comply with 302 and 303....
-
11B-410.2 Floor surfaces
Floor surfaces in platform lifts shall comply with Sections 11B-302 and 11B-303....
