T-shaped space can be provided within bedside clearances. Turning space (60 inch diameter circle) is recommended between beds to allow additional maneuvering and transfer space....
Search Results "ITU-T: International Telecommunications Union Telecommunications Standardization Sector"
-
Bedside Clearances
-
1017.4.1 Size
The intersection of two trails providing a T-shaped space complying with 304.3.2 where the base and the arms of the T-shaped space extend 48 inches (1220 mm) minimum beyond the intersection...
-
1017.4.1 Size
The intersection of two trails providing a T-shaped space complying with 304.3.2 where the base and the arms of the T-shaped space extend 48 inches (1220 mm) minimum beyond the intersection...
-
Chapter 7: Referenced Standards
[See subsections ...]
-
11B-809.2.2 Turning space
If designers elect to provide clear floor space that is at least 36 inches (915 mm) wide, as opposed to the required 30 inches (760 mm) wide, that clearance can be part of a T-turn, thereby...
-
11B-809.2.2 Turning space
If designers elect to provide clear floor space that is at least 36 inches (915 mm) wide, as opposed to the required 30 inches (760 mm) wide, that clearance can be part of a T-turn, thereby...
-
11B-809.2.2 Turning space
If designers elect to provide clear floor space that is at least 36 inches (915 mm) wide, as opposed to the required 30 inches (760 mm) wide, that clearance can be part of a T-turn, thereby...
-
The Roles of the Access Board and the Department of Justice
The ADA requires the Department to issue regulations that include enforceable accessibility standards applicable to facilities subject to title II or title III that are consistent with the...
-
23. Q: We are going to build a new facility. What architectural standards do we have to follow to make sure that our facility is accessible to people with disabilities?
What architectural standards do we have to follow to make sure that our facility is accessible to people with disabilities?...
-
APPENDIX A: Federal Trail Data Standards (FTDS) – Trail Fundamentals
11/08/2011 Trail Type ◼ Trail Class ◼ Managed Use ◼ Designed Use The Federal Trail Fundamentals include four concepts that are the cornerstones of effective trail...
-
Roll-in Access [1014.2.2]
When roll-in access is provided, a turning space at least 60 inches in diameter or a T-shaped space with an arm at least 60 by 36 inches and a base at least 36 inches wide and 24 inches...
-
2. Effective Date
On March 15, 2012, compliance with the 2010 Standards will be required for new construction and alterations....
-
34 CFR Part 104 Discrimination on the Basis of Disability in Federally Assisted Programs and Activities - Notice of interpretation
II ADA Standards) except that Exception (1) to Section 206.2.3 does not apply....
-
Accessible Means of Egress Excerpts from 2000 INTERNATIONAL BUILDING CODE®
COPYRIGHT© 2000 by INTERNATIONAL CODE COUNCIL, INC. Thirteenth Printing: December 2005 Accessible Means of Egress Excerpts...
-
If a more recent edition of ANSI/BHMA Standards for automated doors is issued should that be followed instead of those referenced?
The specific editions of the ANSI/BHMA Standards referenced by the Standards are to be followed (although the Access Board intends to update references to keep them current)....
-
1005.2.1 Height
EXCEPTION: Where a guard complying with sections 1003.2.12.1 and 1003.2.12.2 of the International Building Code (2000 edition) or sections 1012.2 and 1012.3 of the International Building...
-
1005.2.1 Height
EXCEPTION: Where a guard complying with sections 1003.2.12.1 and 1003.2.12.2 of the International Building Code (2000 edition) or sections 1012.2 and 1012.3 of the International Building...
-
C. Designation of Accessible Vehicles
The International Symbol of Accessibility should be displayed as shown in Figure 6....
-
§ 35.151(c) Accessibility standards and compliance date.
(c) Accessibility standards and compliance date....
-
1005.2.1 Height
EXCEPTION: Where a guard complying with sections 1003.2.12.1 and 1003.2.12.2 of the International Building Code (2000 edition) or sections 1012.2 and 1012.3 of the International Building...
-
1630.15(b)(2)
(2) Direct threat as a qualification standard....
-
E. What are the General Requirements for Curb Ramps in the ADA Standards for Accessible Design?
One way to make curb ramps compliant with Title II of the ADA is to build them in accordance with the ADA Standards. 7 Following are the key characteristics of an accessible curb ramp according...
-
‘‘1991 Standards’’ and ‘‘2004 ADAAG’’ (Section-by-Section Analysis)
‘‘1991 Standards’’ and ‘‘2004 ADAAG’’ (Section-by-Section Analysis) The Department has included in the final rule new definitions of both the ‘‘1991 Standards’’ and the ‘‘2004 ADAAG.’...
-
Single-User Toilet Rooms: Split Plumbing
If T-shaped turning space is provided, it should be located to provide an easy approach (i.e., one of the segments aligned with the route into the room)....