(4) Where a request for modification cannot practicably be made and determined in advance (e.g., because of a condition or barrier at the destination of a paratransit or fixed route trip...
Search Results "Determination of Equivalency"
Commonly Searched Documents
-
§ 37.169(b)(4)
-
1018.3 Aisles in Groups B and M
In Group B and M occupancies, the minimum clear aisle width shall be determined by Section 1005.1 for the occupant load served, but shall be not less than that required for corridors by...
-
11B-703.6.1 Pictogram field
The required equivalent verbal description must be placed below the pictogram, and may not intrude into the 6-inch field. ◼ FIGURE 11B-703.6.1 PICTOGRAM FIELD...
-
B.5.i. - What is nonavailability?
Nonavailability refers to circumstances where no commercial items are available that meet the applicable Access Board’s technical provisions (directly or through equivalent facilitation)...
-
C.7.ii. - Can a federal agency provide alternate web pages for users with disabilities to supplement web pages that have innovative features which are inaccessible to assistive technologies?
(When used, text-only pages must contain equivalent information and functionality as the primary pages and must be updated whenever the primary pages change)....
-
Sec. 12144. Public entity operating a demand responsive system. [Section 224]
and usable by individuals with disabilities, including individuals who use wheelchairs, unless such system, when viewed in its entirety, provides a level of service to such individuals equivalent...
-
4.33.3* PLACEMENT OF WHEELCHAIR LOCATIONS
Equivalent accessible viewing positions may be located on levels having accessible egress....
-
§ 35.151(c)(1)
Departures from particular requirements of either standard by the use of other methods shall be permitted when it is clearly evident that equivalent access to the facility or part of the...
-
§ 35.151(c)(2)
Departures from particular requirements of either standard by the use of other methods shall be permitted when it is clearly evident that equivalent access to the facility or part of the...
-
§ 38.97(a)
The diameter or width of the gripping surface of interior handrails and stanchions shall be 11/4 inches to 11/2 inches or shall provide an equivalent gripping surface....
-
§ 38.115(a)
The diameter or width of the gripping surface of interior handrails and stanchions shall be 11/4 inches to 11/2 inches or shall provide an equivalent gripping surface....
-
§ 37.103(d) Vans with a capacity of fewer than 8 persons
is readily accessible to and usable by individuals with disabilities, including individuals who use wheelchairs, unless the system, when viewed in its entirety, meets the standard for equivalent...
-
1017.1 General
After applying Exception 1, when an entity determines that it is impracticable for the entire trail to comply with 1017, the trail shall not be required to comply with 1017....
-
1017.1 General
After applying Exception 1, when an entity determines that it is impracticable for the entire trail to comply with 1017, the trail shall not be required to comply with 1017....
-
§382.97(c)
(c) Any other aircraft model determined by the Department of Transportation to be unsuitable for boarding and deplaning assistance by lift, ramp, or other suitable device....
-
Reassignment
The impending vacancy is equivalent to the position currently held by the employee with a disability....
-
§382.153(c)
(c) If the CRO determines that the carrier's action does not violate a provision of this part, the CRO must provide to the complainant a written statement including a summary of the facts...
-
§27.72(e)(3)
(3) Access to any other aircraft model determined by the Department of Transportation to be unsuitable for boarding and deplaning assistance by lift, ramp, or other suitable device....
-
11B-1008.2.6 Ground surfaces
The type of surface material selected and play area use levels will determine the frequency of inspection and maintenance activities. ◼...
-
ASME: ADA Standard Section 105.2.2
Section 105.2.2 of the ADA Standards cover references to the American Society of Mechanical Engineers (ASME) standards.
-
21. How should an employer handle leave for an employee covered by both the ADA and the Family and Medical Leave Act (FMLA)?
An employer should determine an employee's rights under each statute separately, and then consider whether the two statutes overlap regarding the appropriate actions to take.(59) Under...
-
5. Reassignment to a Vacant Position
Reassignment should be made to a position equivalent to the one presently held in terms of pay and other job status, if the individual is qualified for the position and if such a position...
-
RECOMMENDED CHANGE
as follows: The Committee recommends transfer supports and connections contain the strength to resist vertical forces of 250 pounds and horizontal forces of 125 pounds at locations determined...
-
Section 610 Review
Based on these factors, the agency is required to determine whether to continue the rule without change or to amend or rescind the rule, to minimize any significant economic impact of the...