(d) The overhead clearance between the top of the lift door opening and the sill shall be the maximum practicable but not less than 65 inches (1651 mm)....
Search Results "Bus Lift"
Commonly Searched Documents
-
§ 38.153(d)
- Hill-Rom Likorall™ Overhead Lift, Traverse with Upright Supports
-
5.7.1 Lift Compatibility Clearance in Base for M301
5.7.1 Lift Compatibility Clearance in Base for M301 Description: For portable floor lifts to be effective, they must deploy at diagnostic equipment such that the boom of the lifts can...
- S.R. Smith MultiLift Pool Lift Video 1: Installation, Operation, and Maintenance
-
S.R. Smith aXs Pool Lift Video 3: Resolution
Requires the Registered User plan or above. Login!
-
S.R. Smith aXs Pool Lift Video 2: Advanced Troubleshooting
Requires the Registered User plan or above. Login!
- Patriot Portable Lift by Aqua Creek Products
-
T207 Circulation Paths
As a matter of clarification, the proposed rule specified that, where doorways are provided on one side of a non-rail vehicle, an accessible circulation path must connect each...
-
8. Add § 37.169 to read as follows
8. Add § 37.169 to read as follows:
-
15. Can I store my lift and bring it out only when it is requested by a person with a disability?
Can I store my lift and bring it out only when it is requested by a person with a disability? No....
- Garaventa Xpress II Inclined Platform Wheelchair Lift Operation Video
-
1009.2.4 Seat Height
The height of the lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the...
-
OTHER QUESTIONS
[See subsections ...]
-
§ 38.23(b)(2) Controls
(2) Controls—
-
§ 38.23(b)(4) Power or equipment failure
(4) Power or equipment failure. Platforms stowed in a vertical position, and deployed platforms when occupied, shall have provisions to prevent their deploying, falling, or folding...
-
T402.3 Installation and Operation
When used for boarding and alighting, ramps and bridgeplates shall be firmly attached to the non-rail vehicle to prevent displacement. Ramps and bridgeplates provided on large...
-
1009.2.4 Seat Height
The height of the lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the...
-
4. My pool already existed before the effective date of the new rule. What am I required to do to provide pool access to customers with mobility disabilities?
The 2010 Standards for pool lifts require lifts to be fixed and to meet additional requirements for location, size of the seat, lifting capacity, and clear floor space....
-
§ 38.157(b)
have outside light(s) which, when the door is open, provide at least 1 foot-candle of illumination on the pathway to the door for a distance of 3 feet (915 mm) to the bottom step tread or lift...
-
§ 38.83(b)(9) Platform deflection
The lift platform (not including the entrance ramp) shall not deflect more than 3 degrees (exclusive of vehicle roll) in any direction between its unloaded position and its position when...
-
Section H: Lifts
Yes No N/A Comments/Remedies H1 Is the lift operational at the time of the survey?...
-
§ 38.159(a)(1) General
., lift or ramp) complying with paragraph (b) or (c) of this section and sufficient clearances to permit a wheelchair or other mobility aid user to reach a securement location....
-
§ 38.23(b)(10) Platform movement
No part of the platform shall move at a rate exceeding 6 inches/second during lowering and lifting an occupant, and shall not exceed 12 inches/second during deploying or stowing....
-
§ 38.83(b)(10) Platform movement
No part of the platform shall move at a rate exceeding 6 inches/second during lowering and lifting an occupant, and shall not exceed 12 inches/second during deploying or stowing....