are within 3 inches of the boarding end of the device....
Search Results "Boarding Ramp"
Filters
Commonly Searched Documents
-
T402 Ramps and Bridgeplates
-
R407.1 General
Ramps shall comply with R407....
-
Curb Ramps and Blended Transitions (R309.4) (Section-by-Section Analysis)
Curb Ramps and Blended Transitions (R309.4) (Section-by-Section Analysis) Curb ramps or blended transitions must connect the access aisle serving each accessible on-street parking space...
-
4.8.7 Edge Protection
Ramps and landings with drop-offs shall have curbs, walls, railings, or projecting surfaces that prevent people from slipping off the ramp....
-
4.8.7 EDGE PROTECTION
Ramps and landings with drop-offs shall have curbs, walls, railings, or projecting surfaces that prevent people from slipping off the ramp....
-
QUESTION: WHAT CONSIDERATIONS APPLY TO PVOs’ OBLIGATION TO PROVIDE ASSISTANCE TO PASSENGERS WITH DISABILITIES WITH RESPECT TO BOARDING AND DISEMBARKING FROM VESSELS?
39.83 QUESTION: WHAT CONSIDERATIONS APPLY TO PVOs’ OBLIGATION TO PROVIDE ASSISTANCE TO PASSENGERS WITH DISABILITIES WITH RESPECT TO BOARDING AND DISEMBARKING FROM VESSELS?...
-
11B-705.1.2.2.2.2 Two entrance/exit points
Where the turning space has two entrance/exit points other than the sloped ramp segments, detectable warnings shall be 36 inches (914 mm) deep at both entrance/ exit points, as measured...
-
§ 38.159(a)(1) General
All vehicles covered by this subpart shall provide a level-change mechanism or boarding device (e.g., lift or ramp) complying with paragraph (b) or (c) of this section and sufficient clearances...
-
T503.5 Exterior Illumination for Boarding and Alighting Areas
Exterior lighting shall be provided to illuminate walking surfaces of boarding and alighting areas when the doors of non-rail vehicles are open....
-
DSA Drawing 11B-406-8 Parallel Curb Ramp with No Gutter (2016 CBC)
Requires the Premium User plan or above. (Login or upgrade your account!) -
Diagonal Curb Ramps
Section 406.6 provides specifications for diagonal (or corner type) curb ramps. These curb ramps must have a 48 inch minimum clear space at the bottom....
-
B7. Curb Ramp Width
Is the width of the curb ramp surface at least 36 inches? [ADA Stds 4.7.3] Yes _____ No _____...
-
11B-406.5.5 Wet conditions
Curb ramps and blended transitions shall comply with Section 11B-405.10....
-
Clear Width: ADA Standard Section 405.5
Section 405.5 covers the current ADA Standards for the clear width requirements of ramps.
-
R308.1.3 Common Requirements
Boarding and alighting areas and boarding platforms shall comply with R308.1.3....
-
Research Projects
The Board sponsors and coordinates research for use in developing accessibility guidelines and providing technical assistance to the public....
-
§382.65 What are the requirements concerning on-board wheelchairs?
[See subsections ...]
-
11B-406 CURB RAMPS, BLENDED TRANSITIONS AND ISLANDS
11B-406 Curb ramps, blended transitions and islands [2010 ADAS] 406 Curb Ramps ETA Editor's Note The differences between 2010 ADAS Section 406 and 2013 CBC Section 11B-406...
-
T502.3.1 Clear Width
Doorways shall provide a clear opening of 32 inches (810 mm) minimum.
-
T502.3.2 Thresholds
Thresholds at doorways shall be marked by a stripe. The stripe shall be 1 inch (25 mm) wide minimum and contrast with the rest of the walking surface either light-on-dark or...
-
Section 35.151(i) Curb Ramps (Section-by-Section Analysis)
The current § 35.151(e) on curb ramps has been redesignated as § 35.151(i). ...
-
Section 35.151(i) Curb ramps (Section-by-Section Analysis)
Section 35.151(i) Curb ramps (Section-by-Section Analysis) Section 35.151(e) on curb ramps in the 1991 rule has been redesignated as § 35.151(i)....
-
Figure 505.10.1 Top and Bottom Handrail Extension at Ramps – Drawing from the U.S. Access Board
-
1.2.5 Ramps
1.2.5 Ramps. When overall running slope and cross slope for accessible ramps are measured according to Sections 1.1.11 a recommended tolerance for these slopes is +0.5%....
