Note: Some architects use a "rise over run" formula to calculate the slope of a surface....
Search Results "Transfer Surface"
-
2. Electronic (Digital) Level
-
11B-1003.3.2 Boarding pier clearances
At high water, the entire chain is floating and a transition plate connects the first float to the surface of the launch ramp....
-
1003.3.2 Boarding Pier Clearances
At high water, the entire chain is floating and a transition plate connects the first float to the surface of the launch ramp....
-
Value Contrast (slide 9)
Fixed Surfaces To show where vertical and horizontal surfaces meet is very important. To show edges is very important....
-
Telescopes and Periscopes
Whenever a telescope or periscope is provided, ensure that a separate telescope or periscope is available for use from a standing position (60 inches above the floor or ground surface is...
-
Trail Slopes
Cross slopesāthe side-to-side slope of a trail tread (figure 131)āprovide drainage to keep water from ponding and damaging the trail, especially on unpaved surfaces....
-
2.3.2 IR Receivers
In these instances, the receiving diode can be placed within an oblong lens on the top of the headband, for presumably 360 degree reception, or appear as a rounded protuberance on the surface...
-
1003.3.2 Boarding Pier Clearances
At high water, the entire chain is floating and a transition plate connects the first float to the surface of the launch ramp....
-
1. Executive Summary
access routes to be provided within pedestrian circulation paths located in the public right-of-way, and would establish proposed technical provisions for the width, grade, cross slope, and surface...
-
1. Public Right-of-Way
In particular, Kirola noted that while travelling around San Francisco, she encountered bumps and/or uneven surfaces along: (1) the east side of Fulton Street ("Fulton") between Fillmore...
- SDC Bollard Post with Push Plate or Touch Panel
- Mockett PCS38-94 Clamp-On Power Grommet
-
B. The ADA Standards for Accessible Design
Section 904.2 requires that ā[a]ll portions of counters required to comply with 904 shall be located adjacent to a walking surface complying with 403.ā 2010 Standards § 904.2....
-
C. Raised Porches Are Part Of the Store That Must Be Made Accessible and Located On An Accessible Route
Pursuant to Chapter 3, accessible spaces must have compliant floor surfaces, compliant turning space, and compliant clear floor space, among other requirements. 2010 Standards, §§ 301-309...
- FaceĀ® DipstickĀ® Floor Profiler (Measuring F-Numbers - Concrete Flatness & Levelness Measurement)
- American Standard Yorkville 1.6 gpf Right Height Elongated Pressure Assisted Toilet
- American Standard Cadet 1.6 gpf Right Height Elongated Pressure Assisted Toilet
-
Sold to the Highest Bidder: Building Better Auction Houses with Steel
While steel is a hard surface, the building structure allows for excellent acoustic tuning. We use perforated liner panels and spray-on acoustic insulation to dampen the reverb....
-
How Broken Overhead Channels Guarantee Subterranean Flooding
This continuous moisture transfer transforms your expensive, finished basement into a deeply damp, highly humid, and dangerously musty environment....
- Bradley 1-Station Frequency Lavatory System FL-1H & FL-1L
- Bradley 2-Station Frequency Lavatory System FL-2H & FL-2L
- DORMA 8000 Series Exit Device
- Willoughby Industries ASUW-1314-HEU-BS Contoured High Efficiency Ligature-Resistant Urinal