R402 Protruding Objects (Section-by-Section Analysis) Objects with leading edges between 685 millimeters (2.25 feet) and 2 meters (6.7 feet) above the finish surface must not protrude...
Search Results "Fire-Building Surface"
-
R402 Protruding Objects (Section-by-Section Analysis)
-
1016.4 Passing Spaces
the route is heavily used or adjoins elements, spaces, or facilities that are heavily used; or where the route is a boardwalk or otherwise not at the same level as the adjoining ground surface...
-
Sec. 469.057(b)(1)
(1) the type of buildings and leases subject to this chapter;...
-
Sec. 469.054(c)(1)
(1) the review of the plans or specifications of a building or facility;...
-
Sargent 7 Line Lever Lock
A key-in-lever lock designed for standard duty commercial interior and exterior applications in public buildings, medical offices, hotels/motels and government facilities....
-
§1191.1(b)
(b) The accessibility guidelines for buildings and facilities covered by the Architectural Barriers Act are set forth in Appendices C and D to this part....
-
A. DEFINITIONS AND BACKGROUND
At the time this review began in 2006, BIDMC owned approximately 30 buildings....
-
CHAPTER 4 SPECIAL DETAILED REQUIREMENTS BASED ON USE AND OCCUPANCY
CHAPTER 4 SPECIAL DETAILED REQUIREMENTS BASED ON USE AND OCCUPANCY ETA Editor's Note Sections from California Building Code Chapter 4 not adopted by Division of the State Architect...
-
CHAPTER 33 SAFEGUARDS DURING CONSTRUCTION
CHAPTER 33 SAFEGUARDS DURING CONSTRUCTION ETA Editor's Note This Pocket Guide contains only the excerpts from California Building Code Chapter 33 that are adopted by Division...
-
Transient Lodging
A building or facility containing one or more guest room(s) for sleeping that provides accommodations that are primarily short-term in nature....
-
Alteration
Alteration - An alteration is a change to a building or facility that affects or could affect the usability of the building or facility or part thereof....
-
Facility
Facility – all or any portion of buildings, structures, sites, complexes, rolling stock or other conveyances, equipment, roads, walks, passageways, parking lots, or other real or personal...
-
101.2 Scope
this code shall apply to the construction, alteration, movement, enlargement, replacement, re- pair, equipment, use and occupancy, location, maintenance, removal and demolition of every building...
-
CHAPTER 30 ELEVATORS AND CONVEYING SYSTEMS
CHAPTER 30 ELEVATORS AND CONVEYING SYSTEMS ETA Editor's Note This Pocket Guide contains only the excerpts from California Building Code Chapter 30 that are adopted by Division...
-
106.5.71 Transient Lodging
A building or facility containing one or more guest room(s) for sleeping that provides accommodations that are primarily short-term in nature....
-
PUBLIC-USE AREAS
Interior or exterior rooms or spaces of a building or facility that are made available to the general public and do not include common use areas....
-
PUBLIC-USE AREAS
Interior or exterior rooms or spaces of a building or facility that are made available to the general public and do not include common use areas....
-
Allegion Von Duprin 94/95 Series INPACT Recessed Exit Device
Specifications 94/95 INPACT Concealed Vertical Rod Devices Models: 9447 and 9547 Fire-Rated Models: 9447-F and 9547-F Device Handing: Non-handed Functions...
-
RAMP
A walking surface that has a running slope steeper than one unit vertical in 20 units horizontal (5-percent slope)....
-
R305.1 General
Detectable warning surfaces shall consist of truncated domes aligned in a square or radial grid pattern and shall comply with R305....
-
1005.3.1 Curb or Barrier
Curbs or barriers shall extend 2 inches (51 mm) minimum above the surface of the fishing pier or platform....
-
4.9.4(5)
(5) Top of handrail gripping surface shall be mounted between 34 in and 38 in (865 mm and 965 mm) above stair nosings....
-
4.15.2* Spout Height
Spouts shall be no higher than 36 in (915 mm), measured from the floor or ground surfaces to the spout outlet (see Fig. 27(a))....
-
4.19.6* MIRRORS
Mirrors shall be mounted with the bottom edge of the reflecting surface no higher than 40 in (1015 mm) from the floor (see Fig. 31)....
