Diagnostic equipment that supports patients in a seated position shall comply with M302. ...
Search Results "Construction Support Facility"
-
M302.1 General
-
11B-903.6 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or supporting...
-
§ 1194.2(a)(2)
(2) When procuring a product, if an agency determines that compliance with any provision of this part imposes an undue burden, the documentation by the agency supporting the procurement...
-
4.26.3(3)
Shear force induced in a fastener or mounting device from the application of 250 lbf (1112N) shall be less than the allowable lateral load of either the fastener or mounting device or the supporting...
-
11B-609.8 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the grab bar, fastener, mounting device, or supporting...
-
11B-903.6 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or supporting...
-
Weizel Security 826-S74 SR™ Partition Door
The 826-S74 SafeSupport SR Partition Doors are constructed from ¾” thick extruded polymer resins that do not splinter or crack under high abuse....
-
Table of Contents
F232 Detention Facilities and Correctional Facilities F233 Residential Facilities F234 Amusement Rides F235 Recreational Boating Facilities F236 Exercise Machines and...
-
11B-206.4.7 Restricted entrances
Where restricted entrances are provided to a building or facility, all restricted entrances to the building or facility shall comply with Section 11B-404....
-
11B-206.4.7 Restricted entrances
Where restricted entrances are provided to a building or facility, all restricted entrances to the building or facility shall comply with Section 11B-404....
-
410.6 Real-Time Text Functionality (Section-by-Section Analysis)
Proposed 410.6 would require that, where ICT supports real-time voice communication, it must also support RTT functionality....
-
Yale 6000 Series Commercial Exit Devices
With a range of mechanical and electromechanical functions available, the 6000 can be used in many types of commercial facilities, including office buildings, retail environments, and mixed-use...
-
Methodology and Data Analysis
relevant organizations such as the Center on Aging, University of Wisconsin, Milwaukee; AAHASA; and the Center for Universal Design, NC State University; and recommendations for residential construction...
-
Why Moen Commercial Products?
Our products stand-up to harsh environments with heavy-duty construction, exceptional ...
-
AJW Architectural Products US130-A Series US130-A12 12" Exposed Flange, 1.5" Diameter Security Grab Bar - Configuration A
Flanges are heliarc welded to bar to form a one piece construction. Each flange has three (3) mounting points (1/4" dia.)...
-
M301.1 General
Diagnostic equipment that supports patients in a supine, prone, or side-lying position shall comply with M301. ...
-
11B-602.5 Spout location
The spout shall be located 15 inches (381 mm) minimum from the vertical support and 5 inches (127 mm) maximum from the front edge of the unit, including bumpers. ...
-
4.26.3(4)
a direct tension force of 250 lbf (1112N) plus the maximum moment from the application of 250 lbf (1112N) shall be less than the allowable withdrawal load between the fastener and the supporting...
-
5.8.2.4 Unobstructed Floor Space Recommendation
The base support affects how close the patient can get to the mammography machine because it intrudes into the floor space....
-
1.1.7.3.1 Detached one- and two-family dwellings
lodging houses, live/work units, townhouses not more than three stories above grade plane in height with a separate means of egress, and their accessory structures, may be designed and constructed...
-
General: ADA Standard Section 609.1
Section 609.1 of the ADA Standards covers information in the current ADA Standards for grab bars in toilet facilities and bathing facilities.
-
Table of Contents
and Bathing Facilities 214 Washing Machines and Clothes Dryers 215 Fire Alarm Systems 216 Signs 217 Telephones 218 Transportation Facilities 219 Assistive Listening Systems...
-
Alterations
Alterations When a small business undertakes an alteration to any of its facilities, it must, to the maximum extent feasible, make the alteration accessible....
-
Protrusion Limits: ADA Standard Section 307.2
Section 307.2 covers the current ADA Standards for protrusion limits.
