(1) In sleeping rooms with more than 25 beds covered by this part _|of the Title III regulation or to this section of the title II regulation|_, a minimum of 5% of the beds shall have clear...
Search Results "Clear Floor Space"
Filters
Commonly Searched Documents
-
11B-233.3.6 Graduate student and faculty housing at a place of education
-
11B-233.3.6 Graduate student and faculty housing at a place of education
(1) In sleeping rooms with more than 25 beds covered by this part _|of the Title III regulation or to this section of the Title II regulation|_, a minimum of 5% of the beds shall have clear...
-
11B-233.3.6 Graduate student and faculty housing at a place of education
facilities, including, but not limited to, the provisions in sections 233 and 809. 1) In sleeping rooms with more than 25 beds covered by this part, a minimum of 5% of the beds shall have clear...
-
PROFESSIONAL OFFICE OF A HEALTH CARE PROVIDER
The facility housing the professional office of a health care provider only includes floor levels housing at least one health care provider, or any floor level designed or intended for use...
-
11B-803.5 Coat hooks and shelves
Shelves shall be 40 inches (1016 mm) minimum and 48 inches (1219 mm) maximum above the finish floor or ground....
-
233.1 General
In sleeping rooms with more than 25 beds covered by this part, a minimum of 5% of the beds shall have clear floor space complying with section 806.2.3. 2....
-
Activar Hiawatha 535/509/536/537 Solid 1 inch Diameter Pulls
ANSI: J401 Finishes: US32D Stainless steel US32 Polished stainless US32DMS Antimicrobial satin stainless US3 Polished brass, clear coat US4 Satin brass, clear coat U26 Polished...
-
Housekeeping
Cleaning carts should be placed to the side of the hallways so guests using wheelchairs have space to pass....
-
Break Out Opening: ADA Standard Section 404.3.6
Section 404.3.6 covers the current ADA Standards for the break out openings at swinging or sliding doors and gates.
-
Height: ADA Standard Section 903.5
The top of the bench seat surface shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the finish floor or ground....
-
Maximum Depth: ADA Standard Section 306.3.2
Section 306.3.2 covers the current ADA Standards for the maximum depth for knee clearance.
-
11B-306.3.2 Maximum depth
Knee clearance shall extend 25 inches (635 mm) maximum under an element at 9 inches (229 mm) above the finish floor or ground....
-
11B-903.5 Height
The top of the bench seat surface shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum above the finish floor or ground....
-
11B-604.4 Seats
The seat height of a water closet above the finish floor shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum measured to the top of the seat....
-
2.7 Existing ADA and Rehabilitation Act Requirements for Accessible Medical Care
The guidance document includes information on accessible examination rooms and the clear floor space needed adjacent to medical equipment for individuals who use mobility devices to approach...
-
4.3.8 Operating forces
Adequate clear floor space should be provided to access controls and switches from either the left or the right (see previous description of ‘Clear Floor Space for Reaching’)....
-
R407.4 Width
The clear width of a ramp run and, where handrails are provided, the clear width between handrails shall be 915 mm (3.0 ft) minimum....
-
Tactile Signage
Tactile Signage Raised and Braille characters are required on signs that "designate permanent rooms and spaces."...
-
4.17.3* Size and Arrangement
If the depth of a standard toilet stall is increased at least 3 in (75 mm), then a floor-mounted water closet may be used....
-
How can existing buildings be retrofitted to make them accessible?
It is not acceptable to require people with disabilities to leave the building to reach another floor....
-
BACKGROUND
First Floor Office Space Replace entry door hardware to all occupied offices with hardware, mounted between 34- and 48-inches high, that is operable with one hand and does...
-
Height: ADA Standard Section 902.3
The tops of dining surfaces and work surfaces shall be 28 inches (710 mm) minimum and 34 inches (865 mm) maximum above the finish floor or ground....
-
HALL CALL CONSOLE
[DSA-AC] An elevator call user interface exclusive to a destination-oriented elevator system that requires the user to select a destination floor prior to entering the elevator car....
-
11B-902.3 Height
The tops of dining surfaces and work surfaces shall be 28 inches (711 mm) minimum and 34 inches (864 mm) maximum above the finish floor or ground....
