Grade breaks are not permitted on the surface of ramp runs and turning spaces. Surface slopes that meet at grade breaks must be flush....
Search Results "Parking Space Length"
Commonly Searched Documents
-
Common Requirements (R304.5) (Section-by-Section Analysis)
-
Mary Ann Hay, IALD, LEED™ AP. Artificial Lighting
and have the space feel comfortable....
-
202.3 Alterations
Where existing elements, spaces, or common use areas are altered, each altered element, space, or common use area shall comply with the applicable requirements of Chapter 2....
- Pressalit Care VALUE Support Arm Fixed Height Swing Grab Bar
-
11B-230.1 General
This requirement applies to facilities such as office buildings, courthouses, and other facilities where admittance to the building or restricted spaces is dependent on two-way communication...
- SafetyStepTD Traditional Detectable Warning System
- Hoyer Advance-H Patient Lift
-
11B-904.4.2 Forward approach
Knee and toe space complying with Section 11B-306 shall be provided under the counter....
-
§ 38.23(d)(2) Location and size
Such space shall adjoin, and may overlap, an access path....
-
11B-904.4.2 Forward approach
Knee and toe space complying with Section 11B-306 shall be provided under the counter....
-
1010.1.8 Door arrangement
Space between two doors in a series shall be 48 inches (1219 mm) minimum plus the width of a door swinging into the space....
-
1003.2.13 Accessible means of egress
Accessible spaces shall be provided with not less than one accessible means of egress....
-
Utilities at Recreation Sites
size, or location), the clear floor or ground space only has to comply with requirements to the extent practicable....
-
§ 36.406(f)(3)
(3) Facilities that have more than 5,000 seats shall provide at least five wheelchair spaces and at least three companion seats for each wheelchair space; and...
-
Technical Memorandum TM 2013-22 Storage (Kitchens and Kitchenettes)
Access Board “shelf space” shall be calculated by linear feet and drawers shall be considered shelving for purposes of determining compliance with TAS 804.5....
- Armor-Tile Tactile Systems Modular Paver Systems
-
3. UFAS Compliant Units Deployed in Event of Catastrophic Disasters Equivalent to Hurricanes Katrina and Rita
Where two or more electrical outlets are provided above a length of countertop that is uninterrupted by a sink or appliance, the exception does not require one of the outlets to comply with...
- Magnuson Group Wood Hospitality Coat Racks
-
11B-201.1 Scope, 11B-201.2 Application based on building or facility use, 11B-202.2 Additions, 11B-202.3 Alterations
These would then constitute an altered space....
- Rakks® Wall Mounted Standards with Rakks® Brackets
-
R405 Knee and Toe Clearance (Section-by-Section Analysis)
R405 Knee and Toe Clearance (Section-by-Section Analysis) The technical requirements for knee and toe clearance apply where space beneath an element is included as part of the clear space...
-
2. Protruding Objects
Accessible element or space ANSI A117.1 section APPLICATION 2....
-
12. Seating, tables, or work surfaces
Accessible element or space ANSI A117.1 section APPLICATION 12....
-
5.1.9 Doors
The door shall not swing into or otherwise obstruct the clear floor or ground space or the turning space required by 5.1.4....