A number of commenters expressed concerns about the ability of the Department to require owners of accessible units to participate in the rental program, to require developers, condo associations...
Search Results "Local Requirement"
-
Application of ADA to places of lodging that contain individually owned units. (Section-by-Section Analysis)
-
Transfer Steps: ADA Standard Section 1009.5.4
Where possible, the height of the transfer step should be minimized to decrease the distance an individual is required to lift up or move down to reach the next step to gain access....
-
Height: ADA Standard Section 1005.2.1
or sections 1012.2 and 1012.3 of the International Building Code (2003 edition) (incorporated by reference, see “Referenced Standards” in Chapter 1) is provided, the guard shall not be required...
-
Clearance: ADA Standard Section 804.2
EXCEPTION: Spaces that do not provide a cooktop or conventional range shall not be required to comply with 804.2. Advisory 804.2 Clearance....
-
Assembly Area
For the purposes of these requirements, assembly areas include, but are not limited to, classrooms, lecture halls, courtrooms, public meeting rooms, public hearing rooms, legislative chambers...
-
11B-809.9.4 Work surfaces
Work surfaces shall be 36 inches (914 mm) maximum above the finish floor with minimum lengths at the following locations as required by this section: Linear length of 30 inches...
-
11B-809.9.1 Clear floor space
For a parallel or forward approach to the sink and to the work surface required by Sections 11B-809.9.3 and 11B-809.9.4....
-
11B-703.7.2.6.1 Men’s toilet and bathing facilities
Exception: Within secure perimeter of detention and correctional facilities, geometric symbols shall not be required to be ¼ inch (6.4 mm) thick....
-
11B-222.2 Coat hooks and shelves
shelves are provided in individual compartments at least one of each type complying with Section 11B-803.5 shall be provided in individual compartments in dressing, fitting, or locker rooms required...
-
11B-404.2.5 Thresholds
[2010 ADA Standards] EXCEPTION: Existing or altered thresholds ¾ inch (19 mm) high maximum that have a beveled edge on each side with a slope not steeper than 1:2 shall not be required...
-
BATHROOM
A compartmented bathroom is considered a single unit and is subject to the requirements of Chapters 11A and 11B....
-
11B-809.9.4 Work surfaces
Work surfaces shall be 36 inches (914 mm) maximum above the finish floor with minimum lengths at the following locations as required by this section: Linear length of 30 inches...
-
11B-404.2.5 Thresholds
[2010 ADA Standards] EXCEPTION: Existing or altered thresholds ¾ inch (19 mm) high maximum that have a beveled edge on each side with a slope not steeper than 1:2 shall not be required...
-
11B-703.7.2.6.1 Men’s toilet and bathing facilities
Exception: Within secure perimeter of detention and correctional facilities, geometric symbols shall not be required to be ¼ inch (6.4 mm) thick....
-
BATHROOM
A compartmented bathroom is considered a single unit and is subject to the requirements of Chapters 11A and 11B....
-
11B-809.9.1 Clear floor space
For a parallel or forward approach to the sink and to the work surface required by Sections 11B-809.9.3 and 11B-809.9.4....
-
11B-222.2 Coat hooks and shelves
shelves are provided in individual compartments at least one of each type complying with Section 11B-803.5 shall be provided in individual compartments in dressing, fitting, or locker rooms required...
-
Section 36.303(g)(6) Alternative Technologies
Department should require open movie captioning....
-
§382.105 What is the responsibility of carriers at foreign airports at which airport operators have responsibility for enplaning, deplaning, and connecting assistance?
deplaning, or connecting assistance is provided by the airport operator, rather than by carriers, as a carrier you may rely on the services provided by the airport operator to meet the requirements...
-
505.10 Handrail Extensions
Extensions shall not be required for continuous handrails at the inside turn of switchback or dogleg stairs and ramps. 2....
-
707.5.2 Receipts
Machine location, date and time of transaction, customer account number, and the machine identifier shall not be required to be audible. 2....
-
11B-707.5.2 Receipts
Machine location, date and time of transaction, customer account number, and the machine identifier shall not be required to be audible. 2. ...
-
11B-703.5.6 Height from finish floor or ground
Visual characters indicating elevator car controls shall not be required to comply with Section 11B-703.5.6. 2. ...
-
102 Dimensions for Adults and Children
The 1991 Standards did not provide specific requirements for children’s elements or facilities....