Ensuring that items do not block the accessible route allows independent access....
Search Results "Space Allowance"
-
Accessible Entrances
-
382.57 What services must carriers provide if their automated kiosks are inaccessible?
For example, a passenger who cannot use the kiosk could be allowed to come to the front of the line at the check-in counter, or carrier personnel could meet the passenger at the kiosk and...
-
M101.5 Dimensions (Section-by-Section Analysis)
The only change to this provision was adjustment of the section number to allow for the addition of the new provision, M101.3 Existing Diagnostic Equipment....
-
5.4.4.1 Transfer Support Distance from Transfer Surface Recommendation for Stretchers
To allow the side rail system to fold and store properly, the rails must be at a little less than 3 inches beyond the mattress surface edge (transfer surface edge)....
-
C.3.ii. - Do vendors have to provide product documentation in alternate formats?
For example, an agency may request the documentation in an electronic format that will allow the agency to reprint information in Braille or alternate formats....
-
I. Public Telephones
A text telephone (also commonly known as a TTY) is a device that allows individuals who are deaf or hard of hearing or who have a speech disability to communicate over a telephone....
-
Protruding Objects [4.4]
The standard sweep of canes allows detection of objects with leading edges up to 27 inches from the floor....
-
Steps to Minimize Significant Economic Impacts on Small Entities
The final rule allows exemptions for an entire trail or beach access route when an entity determines that is impracticable for a trail to comply with the technical requirements for trails...
-
Additional Tips and Recommendations for Meals
The ADA mandates that service dogs are allowed to be in places of public accommodation such as hotels, convention centers, restaurants, and other venues that serve food....
-
4.16.3 Height
All of the institutional designs included a raised toilet within the 17"-19" range allowed by ADAAG....
-
Construction and Manufacturing Tolerances
Many dimensions in the ADA Standards are expressed as a range instead of an absolute so that designers can allow some room for minor deviations in construction or manufacturing....
-
Unified Facilities Guide Specifications
The amount of surface irregularity is to be determined by placing the straightedge on the pavement surface and allowing it to rest on the two highest spots covered by its length and measuring...
-
11B-707.1 General
Token collection devices that are designed to accommodate tokens which are perforated can allow a person to distinguish more readily between tokens and common coins....
-
11B-707.1 General
Token collection devices that are designed to accommodate tokens which are perforated can allow a person to distinguish more readily between tokens and common coins....
-
11B-809.9.3 Removable base cabinets
Knee and toe space complying with Section 11B-306 shall be provided at sinks and work surfaces required to comply with Section 11B-809.9.4....
-
11B-809.9.3 Removable base cabinets
Knee and toe space complying with Section 11B-306 shall be provided at sinks and work surfaces required to comply with Section 11B-809.9.4....
-
UDI
No hesitation or reduction in speed was allowed to achieve that rating....
-
MEZZANINE
[DSA-AC] An intermediate level or levels between the floor and ceiling of any story with an aggregate floor area of not more than one-third of the area of the room or space in which the...
-
11B-502.6 Identification
NOTES 11B-502.6 Identification Amends current regulations to require the International Symbol of Accessibility at accessible parking spaces...
-
B5
Are all accessible parking spaces, including the access aisle, relatively level (1:50 or 2%) in all directions?...
-
502.6 Identification
Parking space identification signs shall include the International Symbol of Accessibility complying with 703.7.2.1....
-
ESSENTIAL FEATURES
Those elements and spaces that make a building or facility usable by, or serve the needs of, its occupants or users....
-
2.2.4 Maneuverability
the following tasks: • 90-degree turn, • 180-degree turn with no restrictions on length of the maneuver, • 180-degree with a center barrier, • 360-degree rotation within a space...
-
Application [§201]
Requirements in the standards apply to both exterior and interior spaces and elements provided on a site, usually without distinction....