The Cavs shall provide four (4) tickets for Accessible Seating to any five (5) events at Quicken Loans Arena that occur within one year from the Effective Date of this Agreement to...
Search Results "Designated Aisle Seat (Assembly)"
-
I. RELIEF FOR AGGRIEVED PERSONS
-
M305 Supports
criteria for transfer supports are discussed under M301 Diagnostic Equipment Used by Patients in Supine, Prone, or Side-Lying Position and M302 Diagnostic Equipment Used by Patients in Seated...
-
11B-612.2 Bench
Where seating is provided in saunas and steam rooms, at least one bench shall comply with Section 11B-903....
-
Wheelchair
[35.104 & 36.104] A manually-operated or power-driven device designed primarily for use by an individual with a mobility disability for the main purpose of indoor or of both indoor and...
-
§ 382.63 Carrier programs
(a)(1) Each carrier that operates aircraft with more than 19 passenger seats shall establish and implement, within 180 days of the effective date of this part (i.e., by October 2, 1990),...
-
8.5 Updating Standards in the Future
Wheelchair technologies might also change, lowering or raising seat heights or altering width or depth dimensions....
-
What barriers will it be "readily achievable" to remove?
bars in toilet stalls; 13) Rearranging toilet partitions to increase maneuvering space; 14) Insulating lavatory pipes under sinks to prevent burns; 15) Installing a raised toilet seat...
-
APPENDIX A: Federal Trail Data Standards (FTDS) – Trail Fundamentals
11/08/2011 Trail Type ◼ Trail Class ◼ Managed Use ◼ Designed Use The Federal Trail Fundamentals include four concepts that are the cornerstones of effective trail planning...
-
Trails Are Not Outdoor Recreation Access Routes
An outdoor recreation access route is a continuous, unobstructed path designated for pedestrian use that connects pedestrian elements within a recreation site, such as a picnic area, camping...
-
Notes
Notes GG Analysis of Seat Heights for Wheeled Mobility Devices. The study is available at http://udeworld.com/analysis-of-seat-height-for-wheeled-mobility-devices....
-
Participants
demographic details of the study can be seen in Table 3, including hours using a wheelchair per day, years using a wheelchair, number of level and non-level transfers and average wheelchair seat...
-
[2010 ADAS] 105.2.2 ASME
ASME A17.1-2000 is used by local jurisdictions throughout the United States for the design, construction, installation, operation, inspection, testing, maintenance, alteration, and repair...
-
[2010 ADAS] 105.2.2 ASME
ASME A17.1-2000 is used by local jurisdictions throughout the United States for the design, construction, installation, operation, inspection, testing, maintenance, alteration, and repair...
- Willoughby Industries WAW-2333 AquaWave® Three Station Solid Surface Lavatory System
- Willoughby Industries WAW-2322 AquaWave® Two Station Solid Surface Lavatory System
-
11B-103 Equivalent facilitation
Nothing in these requirements prevents the use of designs, products, or technologies as alternatives to those prescribed, provided they result in substantially equivalent or greater accessibility...
-
§1630.14(d)(1) Employee health program
An employee health program, including any disability-related inquiries or medical examinations that are part of such program, must be reasonably designed to promote health or prevent disease...
-
11B-103 Equivalent facilitation.
Nothing in these requirements prevents the use of designs, products, or technologies as alternatives to those prescribed, provided they result in substantially equivalent or greater accessibility...
-
11B-103 Equivalent facilitation
Nothing in these requirements prevents the use of designs, products, or technologies as alternatives to those prescribed, provided they result in substantially equivalent or greater accessibility...
- Olympia i2 Single Handle Lavatory Faucet L-6050
- Pilot Rock T-600 Series Caterpillar Picnic Table
- Just Manufacturing Backsplash Mounted Hose Bibb Faucet with Tee Handle
-
11B-104.1.1 Construction and manufacturing tolerances
Recognized tolerances are not intended to apply to design work. It is good practice when specifying dimensions to avoid specifying a tolerance where dimensions are absolute....
-
11B-104.1.1 Construction and manufacturing tolerances
Recognized tolerances are not intended to apply to design work. It is good practice when specifying dimensions to avoid specifying a tolerance where dimensions are absolute....