Galvanized steel mounting angles and diagonal braces add strength to the table solving the durability problems of lesser plastic picnic tables....
Search Results "Viewing Angle"
Filters
Commonly Searched Documents
-
Pilot Rock RT Series End Accessible Recycled Plastic Picnic Table
-
Alumi-Guard Handrail
Ensures Pedestrian Safety Complements Alumi-Guard's Guardrail System Adaptable To Most Existing Posts or Walls Durable & Easy to Install Available in Straight & Angled...
-
Common Technical Requirements
For instance, if five benches are provided at a viewing area, at least 20 percent (or one) of the benches must comply with the technical requirements for benches....
-
F247.4 Trail Facilities
Outdoor recreation access routes are not required at camping facilities, picnic facilities, or viewing areas provided on trails....
-
11B-703.8.9 Height above floor
Low resolution VMS characters shall be 40 inches (1016 mm) minimum above the floor of the viewing position, measured to the baseline of the character....
-
Tom Williams, AIA, National Accessibility Officer, GSA, Public Buildings Service
There actually are automated blind systems that have been developed that allow blinds to raise and lower and to adjust the angle of the louvers in the blinds so that they can compensate...
-
DOT Response
The Department believes that when a denied or missed trip makes a subsequent requested trip impossible, two opportunities to travel have been lost from the point of view of the passenger...
-
§104.22(a) Accessibility
A recipient shall operate its program or activity so that when each part is viewed in its entirety, it is readily accessible to handicapped persons....
-
4.35.5 Mirror
of the same use, then in an accessible dressing room, a full-length mirror, measuring at least 18 in wide by 54 in high (460 mm by 1370 mm), shall be mounted in a position affording a view...
-
11B-502.7.1 Arrangement
Wheelchair users traveling behind parked vehicles may be obscured from the view of drivers backing out of parking spaces, especially when passing behind high-profile vehicles....
-
11B-216.3 Directional and informational signs
It should be noted that exterior signs are likely to be viewed at a greater distance than interior signs, which would affect the prescribed height of visual characters....
-
Architectural Builders Hardware Mfg., Inc. 6000 Series Push/Pull Hospital Latch
The sleek design has a short throw angle, allowing the door to be opened with an easy push or pull action, even when hands are not free....
-
TownSteel TDG129 Door Guard
SPECIFICATION Material Zinc alloy plated to match finish Maximum Door Opening 4" when engaged Door Angle Protector Included with screws Door Guard Shim Come with standard package...
-
Sec.36.605(a)(2)
notice in the Federal Register, hold an informal hearing in Washington, DC at which interested persons, including individuals with disabilities, are provided an opportunity to express their views...
-
INTERNATIONAL SYMBOL OF ACCESSIBILITY
It is a graphic representation of the profile view of a wheelchair with occupant. See Chapter 11B, Figure 11B-703.7.2.1.◼...
-
INTERNATIONAL SYMBOL OF ACCESSIBILITY
It is a graphic representation of the profile view of a wheelchair with occupant. See Chapter 11B, Figure 11B-703.7.2.1. ◼...
-
Detecto 6550 Portable Wheelchair Scale
industry’s most advanced, featuring serial, USB and optional wired and Wi-FI Ethernet output, BMI calculation, yellow “quick keys” for basic weighing, 350-degree rotating mounting bracket for viewing...
-
Small Entities Affected by Rule
The final rule affects small entities that construct or alter camping facilities, picnic facilities, viewing areas, trails, and beach facilities on federal lands pursuant to a concession...
-
CRL-Blumcraft® Access Control Handles 08 7100
CRL-Blumcraft® Electronic Egress Control Handles are an economical method to control access into, and safe exit from, areas that call for security and still maintain the beauty and view...
-
Guidance on the 2010 ADA Standards for Accessible Design
This publication may be viewed or downloaded from the ADA website (www.ADA.gov)....
-
Turning Space [1015.4]
space at least 60 inches in diameter or a T-shaped space with an arm at least 60 by 36 inches and a base at least 36 inches wide by 24 inches long (figure 29) must be provided within the viewing...
-
Whenever more than 300 seats are provided, wheelchair seating locations must be provided in more than one location.
Wheelchair seating locations must be dispersed throughout all seating areas and provide a choice of admission prices and views comparable to those for the general public....
-
American Safety Tread Co., Inc. Type G500R Stairway Nosing Replacement
Width: 9" Lip: 1-3/8" at 90° angle Thickness: 1/4" Anchor Options: Drilled for screws....
-
American Safety Tread Co., Inc. Type SG4702 Stairway Nosing Replacement
Width: 5" Lip: 1-3/8" at 83° angle Thickness: 1/4" Anchor Options: Drilled for screws....
