Building entries must be flush with the grade of the outside access route and have a beveled doorsill that is not more than one-half inch high. Sometimes it's fairly easy to add...
Search Results "Vertical Dispersion"
-
Getting In
-
11B-1005.2.1.1 Dispersion
Railings, guards, or handrails required to comply with Section 11B-1005.2.1 shall be dispersed throughout the fishing pier or platform. Advisory 11B-1005.2.1.1 Dispersion....
-
11B-1005.2.1.1 Dispersion
Railings, guards, or handrails required to comply with Section 11B-1005.2.1 shall be dispersed throughout the fishing pier or platform. Advisory 11B-1005.2.1.1 Dispersion....
-
11B-204.1 General
Within play areas, protruding objects on circulation paths shall not be required to comply with Section 11B-307 provided that ground level accessible routes provide vertical clearance in...
-
M305.3.1 Length (Section-by-Section Analysis)
For vertical standing supports, the MDE NPRM proposed a gripping surface length of 18 inches minimum....
-
11B-204.1 General
Within play areas, protruding objects on circulation paths shall not be required to comply with Section 11B-307 provided that ground level accessible routes provide vertical clearance in...
-
Technical Memorandum TM 2013-14 Dining Surfaces
TM 2013-14 Dining Surfaces Effective Date: June 1, 2013 2012 TAS Reference: 226 and 902 Dispersion The requirements of TAS 226 and 902 are applicable to fixed or built-in...
-
SETTLEMENT AGREEMENT BETWEEN THE UNITED STATES OF AMERICA AND PALACE SPORTS AND ENTERTAINMENT, LLC, REGARDING THE PALACE OF AUBURN HILLS
[See subsections ...]
-
Ascension Protege Portable Wheelchair Lift 5442P
The latest product offering from Ascension will open customers to a lower price point, while retaining the superior quality and performance only available from an Ascension lift. The...
-
M305.3.1 Length
support gripping surfaces shall comply with M305.3.1.1, horizontal standing support gripping surfaces on diagnostic equipment containing a wheelchair space shall comply with M305.3.1.2 and, vertical...
-
Section B: Passenger Drop-Off Area
(§503.4) B3 Is there vertical clearance of at least 114" (9 feet 6 inches) from the site entrance to the vehicle pull-up area, in the access aisle...
-
Do the exceptions for accessible routes between stories apply to facilities that are only partially occupied by entities not permitted the exception, such as health care facility or shopping center?
Accessible routes between stories are not required in private sector facilities that are either less than 3 stories or that have less than 3,000 square feet per story excluding the...
-
Van-Accessible Parking Spaces
parking spaces are the same as accessible parking spaces for cars except for three features needed for vans: a wider access aisle (96") to accommodate a wheelchair lift; vertical...
-
Parking
and access aisles. 11B-502.4 Identification at accessible spaces and/or lot entrances. 11B-502.6 11B-502.8 Vertical...
-
Parking
and access aisles. 11B-502.4 Identification at accessible spaces and/or lot entrances. 11B-502.6 11B-502.8 Vertical...
-
11B-303.2 Vertical
Changes in level of ¼ inch (6.4 mm) high maximum shall be permitted to be vertical and without edge treatment. [2010 ADA Standards] 303.2 Vertical....
-
11B-303.2 Vertical
Changes in level of ¼ inch (6.4 mm) high maximum shall be permitted to be vertical and without edge treatment. [2010 ADA Standards] 303.2 Vertical....
-
4.1.2(5)(b)
The vertical clearance at such spaces shall comply with 4.6.5. All such spaces may be grouped on one level of a parking structure....
-
Scenario 8 – Accessibility
Ayana recently enrolled in a school that does not have an elevator. The school was built in the early 1960s and, due to limited resources, the district has never altered the...
-
Bobrick 18" Straight Grab Bar Peened B-6806.99 x 18
18" (455mm) long, 1-1/2" (38mm) dia. tubing, peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick,...
-
Delta 1-1/2″ x 18″ ADA Grab Bar, Concealed Mounting 40118-PS
Product Features and Benefits 18″ long, 1 1/2″ wide Concealed mounting - mounting hardware included 3″ diameter flanges 1 1/2″ wall clearance Limited Faucet and Finish...
-
Bobrick 18" Straight Grab Bar B-6806 x 18
18" (455mm) long, 1-1/2" (38mm)dia. tubing. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick, type 304...
-
Bobrick 18" Straight Grab Bar B-5806 x 18
18" (455mm) long, 1-1/4" (32mm) dia. tubing. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick, type 304...
-
Bobrick 18" Straight Grab Bar Peened B-5806.99 x 18
18" (455mm) long, 1-1/4" (32mm) dia. tubing , peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm)...
