Transfer supports with circular cross sections shall have an outside diameter of 1 ¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
Search Results "Rail Crossing"
-
M305.2.4.1 Circular Cross Section
-
206.4.4.2 Direct Connections
EXCEPTION: In key stations and existing intercity rail stations, existing direct connections shall not be required to comply with 404....
-
11B-206.4.4.2 Direct connections
Exception: In key stations and existing intercity rail stations, existing direct connections shall not be required to comply with Section 11B-404. ...
-
11B-206.4.4.2 Direct connections
Exception: In key stations and existing intercity rail stations, existing direct connections shall not be required to comply with Section 11B-404....
-
11B-206.4.4.2 Direct connections
Exception: In key stations and existing intercity rail stations, existing direct connections shall not be required to comply with Section 11B-404....
-
206.4.4.2 Direct Connections
EXCEPTION: In key stations and existing intercity rail stations, existing direct connections shall not be required to comply with 404....
-
1017.7 Slopes
This section contains technical requirements for the maximum running slope and segment length (1017.7.1) and cross slope (1017.7.2) of trails....
-
Trail Slopes
Cross slopes that are too steep can be difficult to traverse, but trails with too little cross slope tend to become streams. Water running down or ponding on trails destroys them....
-
T210 Wheelchair Spaces
Under the 2016 Non-Rail Vehicle Guidelines, large non-rail vehicles must provide at least two wheelchair spaces, and small non-rail vehicles must provide at least one wheelchair space....
-
403.3 Slope
The cross slope of walking surfaces shall not be steeper than 1:48....
-
403.3 Slope
The cross slope of walking surfaces shall not be steeper than 1:48....
-
May a transit operator require that wheelchairs be secured in buses and vans?
The regulations do not require that rail vehicles be equipped with securement devices; if securement devices are nonetheless provided, their use is optional and at the rider’s discretion...
-
May a transit operator require that wheelchairs be secured in buses and vans?
The regulations do not require that rail vehicles be equipped with securement devices; if securement devices are nonetheless provided, their use is optional and at the rider’s discretion...
-
403.3 Slope
The cross slope of walking surfaces shall not be steeper than 1:48....
-
M305.2.4.2 Non-Circular Cross Section
Transfer supports with non-circular cross sections shall have a cross-section dimension of 2 inches (51 mm) maximum and a perimeter dimension of 4 inches (100 mm) minimum and 4.8 inches...
-
§ 37.42(f)
(f) For purposes of this part, level-entry boarding means a boarding platform design in which the horizontal gap between a car at rest and the platform is no more than 10 inches on...
-
§ 38.51(a)
(a) New, used and remanufactured rapid rail vehicles, to be considered accessible by regulations in part 37 of this title, shall comply with this subpart....
-
Section 37.75 Remanufacture of Non-Rail Vehicles and Purchase or Lease of Remanufactured Non-rail Vehicles by Public Entities Operating Fixed Route Systems
Section 37.75 Remanufacture of Non-Rail Vehicles and Purchase or Lease of Remanufactured Non-rail Vehicles by Public Entities Operating Fixed Route Systems This section tracks the statute...
-
§ 37.21(a)(1)
(1) Any public entity that provides designated public transportation or intercity or commuter rail transportation;...
-
ADA & Level Boarding - Alternatives
49 CFR §37.42(b) DECEMBER 14, 2011
-
§ 38.113(d)(4) Exception
(4) Exception. Retrofitted vehicles shall be coordinated with the platform in existing stations such that the horizontal gap shall be no greater than 4 inches and the height of the...
-
§ 38.107(a)(2)
(2) The height of the water closet shall be 17 inches to 19 inches measured to the top of the toilet seat. Seats shall not be sprung to return to a lifted position.
-
6.12 Handrails and Edge Protection
Where elevated dune crossings or dune crossings steeper than 1:20 (5 percent) are part of beach access routes, handrails complying with ABAAS section 505 and edge protection complying...
-
Step 3: Apply the Accessibility Provisions
This step involves looking at FSTAG, sections 7.4.1 through 7.4.8, which contain the technical requirements for trail grade, cross slope, resting interval, surface, clear tread width, passing...