The surface of the clear ground space must be firm and stable. Additional information on firm and stable surfaces is provided in the trails section of this guide....
Search Results "Parking Surface"
Filters
Commonly Searched Documents
-
Surface, Slope, and Openings [1011.2.2, 1011.2.3, and 1011.2.4]
-
4.3.6 Surface Textures
The surface of an accessible route shall comply with 4.5....
-
4.3.6 SURFACE TEXTURES
The surface of an accessible route shall comply with 4.5....
-
11B-404.2.10 Door and gate surfaces
Swinging door and gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
11B-404.2.10 Door and gate surfaces
Swinging door and gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
11B-404.2.10 Door and gate surfaces
Swinging door and gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
11B-502.8 Additional signs
An additional sign shall be posted either; 1) in a conspicuous place at each entrance to an off-street parking facility or 2) immediately adjacent to on-site accessible parking and visible...
-
Acceptable Trail Surfacing Requirements
Trail surfaces are currently considered accessible only if the surfacing material is firm, stable, and slip-resistant and the trail has the engineered attributes of adequate width, moderately...
-
b. Transfer Surface Location
The MDE NPRM proposed the same location and transfer sides of the transfer surface for diagnostic equipment used by patients in the supine, prone, or side-lying position (M301) and diagnostic...
-
11B-209.4 Valet parking
Parking facilities that provide valet parking services shall provide at least one passenger loading zone complying with Section 11B-503....
-
11B-209.4 Valet parking
Parking facilities that provide valet parking services shall provide at least one passenger drop-off and loading zone complying with Section 11B-503....
-
11B-209.4 Valet parking
Parking facilities that provide valet parking services shall provide at least one passenger drop-off and loading zone complying with Section 11B-503....
-
502.3.1 Width
Access aisles serving car and van parking spaces shall be 60 inches (1525 mm) wide minimum....
-
502.3.1 Width
Access aisles serving car and van parking spaces shall be 60 inches (1525 mm) wide minimum....
-
11B-502.3.1 Width
Access aisles serving car and van parking spaces shall be 60 inches (1524 mm) wide minimum....
-
502.3.1 Width
Access aisles serving car and van parking spaces shall be 60 inches (1525 mm) wide minimum....
-
11B-502.3.1 Width
Access aisles serving car and van parking spaces shall be 60 inches (1524 mm) wide minimum....
-
11B-502.3.1 Width
Access aisles serving car and van parking spaces shall be 60 inches (1524 mm) wide minimum....
-
502.3.1 Width
Access aisles serving car and van parking spaces shall be 60 inches (1525 mm) wide minimum....
-
Typical Issues
Typical Issues When parking is provided for voters, staff and volunteers, accessible parking must be provided for people with disabilities....
-
Bonded Impact/cushioning Surfaces
Bonded Impact/cushioning Surfaces Eight different surface test specimens were formed with surface dimensions of 1.2m x 1.2m with a depth of 0.3m (48”x48”x 12”) in Madison WI (Figure 1...
-
Seton Custom Aluminum Parking Signs JS0104
Manage parking on your premises with Custom Parking Signs Rigid aluminum parking signs have a screen printed border Your custom wording is added with durable outdoor...
-
3.1.4 Width of Vehicle Parking Areas
The width of vehicle parking areas shall comply with applicable provisions of section 3.1.4....
-
Stabila, Inc. Magnetic TECH Digital Electronic Level Video
Requires the Registered User plan or above. Login!
