If portable or station-based lifts, ramps or bridge plates meeting the applicable requirements of this section are provided at stations or other stops required to be accessible under regulations...
Search Results "Military Base"
-
§ 38.159(a)(2) Exception
-
404.3.1 Clear Width
The minimum clear width for automatic door systems in a doorway shall be based on the clear opening provided by all leaves in the open position....
- Hill-Rom Liko® M220 / M230 Mobile Lift
-
Kitchens and Kitchenettes
Section 4.34.6 requires a clearance between opposing base cabinets, counters, appliances, or walls of at least 40 inches except in a U-shaped kitchen where the minimum clearance is 60 inches...
-
Section 1630.10(b)—Qualification Standards and Tests Related to Uncorrected Vision
Section 1630.10(b)—Qualification Standards and Tests Related to Uncorrected Vision This provision allows challenges to qualification standards based on uncorrected vision, even where...
-
Introduction
Communities are best understood by their own residents—a fact that makes community-based emergency planning and response highly effective....
-
Current industry standard practices resulting from this project
The research was conducted by the University of Pittsburgh Human Engineering Research Laboratory and was based on exposure limits of vibration to the human body established in ISO 2631,...
-
The ADA and Its Integration Mandate
The Supreme Court held that public entities are required to provide community-based services to persons with disabilities when (a) such services are appropriate; (b) the affected persons...
- Magnuson Group KOBE Hook
- Mockett CH11 Longhorn Coat Hook
- BEA Inc. LZR-Microscan Swinging Door Sensor
-
11B-404.3.1 Clear width
The minimum clear width for automatic door systems in a doorway shall be based on the clear opening provided by all leaves in the open position....
-
Dimensions and Capitalization: ADA Standard Section 703.3.1
Table 703.3.1 Braille Dimensions Measurement Range Minimum in Inches Maximum in Inches Dot base diameter 0.059 (1.5 mm) to 0.063 (1.6 mm)...
-
Character Spacing: ADA Standard Section 703.2.7
Where characters have other cross sections, spacing between individual raised characters shall be 1/16 inch (1.6 mm) minimum and 4 times the raised character stroke width maximum at the base...
-
11B-703.2.7 Character spacing
Where characters have other cross sections, spacing between individual raised characters shall be 1/16Â inch (1.6 mm) minimum and 4 times the raised character stroke width maximum at the base...
-
11B-703.2.7 Character spacing
Where characters have other cross sections, spacing between individual raised characters shall be 1/16Â inch (1.6 mm) minimum and 4 times the raised character stroke width maximum at the base...
-
Dispersion: ADA Standard Section 235.2.1
Section 235.2.1 covers scoping requirements in the current ADA Standards for dispersion of boat slips.
-
11B-404.3.1 Clear width
The minimum clear width for automatic door systems in a doorway shall be based on the clear opening provided by all leaves in the open position....
-
410.4.2 Digital Wireline (Section-by-Section Analysis)
410.4.2 Digital Wireline (Section-by-Section Analysis) This section proposes that ICT in the form of digital wireline devices (such as VoIP-based office desk telephones) would be required...
-
Free-standing and Post-mounted Objects
This is based on standard measures for cane sweep. Objects with leading edges at or below 27 inches or above 80 inches can protrude any amount....
-
Assumptions
Access Board published values for firmness and stability in the NPRM for Outdoor Developed Areas based on use of the Rotational Penetrometer....
-
Polypavement
The Polypavement is applied to a base of compacted native soils and is then mixed into an additional 2 inches of tilled soil....
- TownSteel CD/CDC Series, Grade 1 Cylindrical Locks
-
Salsbury Industries See Through Metal Locker
Requires the Registered User plan or above. Login!