The space between the wall and the grab bar shall be 1½ inches (38 mm). The space between the grab bar and projecting objects below and at the ends shall be 1½ inches (38 mm) minimum....
Search Results "Head End Wall"
-
11B-609.3 Spacing
-
11B-609.3 Spacing
The space between the wall and the grab bar shall be 1½ inches (38 mm). The space between the grab bar and projecting objects below and at the ends shall be 1½ inches (38 mm) minimum....
-
Bradley In-Wall Towel Dispenser 198
Satin finish Stainless Steel Towel dispenser For Installation Behind Wall or Mirror For 1/2" Thick Drywall Installation For 5/8" Thick Drywall, use...
-
4.20.2 Floor Space
The amount of clear floor space in front of a bathtub required by ADAAG (30"-48" min depth depending on the direction of travel by the length of the tub including a seat at the head of the...
-
M301.2.3 Transfer Surface Transfer Sides
The option to transfer will be required only on one long side of the patient scanning/imaging table and not at the “foot” or “head” end of such surfaces....
-
1134A.5, Item 2
Reinforced walls for grab bars. A bathtub installed without surrounding walls shall provide reinforced areas for the installation of floor-mounted grab bars....
-
1134A.5, Item 2
Reinforced walls for grab bars. A bathtub installed without surrounding walls shall provide reinforced areas for the installation of floor-mounted grab bars....
-
Zurn Z5310 Wall Hung Lavatory
Z5310 SERIES Wall Hung Lavatory Z5311 Single Hole Z5314 4" Faucet Centers Z5318 8" Faucet Centers For all rough in dimensions, please refer to the Zurn Specification Sheet...
-
Zurn Z5350 Wall Hung Lavatory
Z5350 SERIES Wall Hung Lavatory Z5351 Single Hole Z5354 4" Faucet Centers Z5358 8" Faucet Centers For all rough in dimensions, please refer to the Zurn Specification Sheet...
-
4.20.3 Seat
An in-tub seat or a seat at the head end of the tub shall be provided as shown in Fig. 33 and 34. The structural strength of seats and their attachments shall comply with 4.26.3....
-
4.20.3 SEAT
An in-tub seat or a seat at the head end of the tub shall be provided as shown in Fig. 33 and 34. The structural strength of seats and their attachments shall comply with 4.26.3....
-
Haws Barrier-Free Chilled Wall Mount Fountain H1001.8HPS
Outfitted with such protective features as vandal resistant bubbler head, waste strainer, and bottom plate, this electric water cooler is quick to discourage vandals. 18 gauge Type...
-
Haws Barrier-Free Chilled Wall Mount Fountain H1001.8
Outfitted with such protective features as vandal resistant bubbler head, waste strainer, and bottom plate, this electric water cooler is quick to discourage vandals. 18 gauge Type...
-
American Dryer, Inc Wall Guard Accessory
Industry-First ADA Wall Guard No need to cut a hole in the wall to achieve ADA compliance....
-
4.34.5.4(2) Seat
An in-tub seat or a seat at the head end of the tub shall be provided as shown in Fig. 33 and 34. The structural strength of seats and their attachments shall comply with 4.26.3....
-
11B-806.2.3.1 Personal lift device floor space
shall be parallel to the long side of the bed and extend under the bed to points horizontally 30 inches (762 mm), vertically 7 inches (178 mm) and not more than 12 inches (305 mm) from the head...
-
Nana Wall Systems, Inc. Folding Glass Walls Solid Wood WD65
Aesthetics Inside And Out Kitchen Transition A NanaWall specialty configuration combining both a pass-through window and folding door into the same opening is just one of the many wall...
-
Haws Barrier-Free Chilled Dual Wall Mount Fountain H1011.8HO
Outfitted with such protective features as vandal resistant bubbler heads, waste strainer, and bottom plates, these electric water coolers are quick to discourage vandals. 18 gauge...
-
Maddak Wall Switch Extension Handle
Puts wall switches within easy reach of children, wheelchair users or people with limited reach. It provides a 12" (30.5 cm) extension to any standard toggle switch....
-
4.9.4(6)
(6) Ends of handrails shall be either rounded or returned smoothly to floor, wall or post....
-
4.8.5(6)
(6) Ends of handrails shall be either rounded or returned smoothly to floor, wall, or post....
-
Haws Barrier-Free Chilled Dual Wall Mount Fountain H1011.8
Outfitted with such protective features as vandal resistant bubbler heads, waste strainer, and bottom plates, these electric water coolers are quick to discourage vandals. 18 gauge...
-
Haws Barrier-Free Chilled Dual Wall Mount Fountain H1011.8HPS
Outfitted with such protective features as vandal-resistant bubbler heads, waste strainer, and bottom plates, these electric water coolers are quick to discourage vandals. 18 gauge...
-
H22
Is a second horizontal grab bar at least 36 inches long securely mounted on the back wall with one end no more than 6 inches from the side wall 33 to 36 inches above the floor?...
