The goal of Crytico.com is to remove the barriers that exist in the mobility industry between consumers, dealers (retailers), and manufacturers. We want to bring these interested...
Search Results "Electric Vehicle Connector"
-
Crytico
-
T206 Handrails, Stanchions, and Handholds
The 2016 Non-Rail Vehicle Guidelines, as with the existing guidelines, require handrails, stanchions, or handholds to be provided at passenger doorways, fare collection devices (where such...
-
T203 Steps
[See subsections ...]
-
T502 Doorways
[See subsections ...]
-
T503 Illumination
[See subsections ...]
-
T205 Illumination
[See subsections ...]
-
Sec. 12145. Temporary relief where lifts are unavailable. [Section 225]
[See subsections ...]
-
§ 38.23(b)(11) Boarding direction
(11) Boarding direction. The lift shall permit both inboard and outboard facing of wheelchair and mobility aid users.
-
§ 38.23(d) Securement devices
(d) Securement devices—
-
§ 38.23(b)(10) Platform movement
(10) Platform movement. No part of the platform shall move at a rate exceeding 6 inches/second during lowering and lifting an occupant, and shall not exceed 12 inches/second during...
-
§ 38.23(b)(3) Emergency operation
(3) Emergency operation. The lift shall incorporate an emergency method of deploying, lowering to ground level with a lift occupant, and raising and stowing the empty lift if the...
-
§ 38.23(c)(4) Ramp barriers
(4) Ramp barriers. Each side of the ramp shall have barriers at least 2 inches high to prevent mobility aid wheels from slipping off.
-
§ 38.27(b)
(b) Each securement location shall have a sign designating it as such.
-
§ 38.83(b)(4) Power or equipment failure
(4) Power or equipment failure. Lift platforms stowed in a vertical position, and deployed platforms when occupied, shall have provisions to prevent their deploying, falling, or...
-
§ 38.83(b)(10) Platform movement
(10) Platform movement. No part of the platform shall move at a rate exceeding 6 inches/second during lowering and lifting an occupant, and shall not exceed 12 inches/second during...
-
§ 38.83(b)(11) Boarding direction
(11) Boarding direction. The lift shall permit both inboard and outboard facing of wheelchairs and mobility aids.
-
12148(b)(2) Historic trains
(2) Historic trains In order to comply with paragraph (1) with respect to the remanufacture of a vehicle of historic character which is to be used on a segment of a light or rapid rail...
-
§ 38.73(d)(1) Requirements
The design of level-entry vehicles shall be coordinated with the boarding platform or mini-high platform design so that the horizontal gap between a vehicle at rest and the platform shall...
-
§ 38.23(d)(4) Orientation
front of the vehicle....
-
§ 38.23(b)(6) Platform surface
(6) Platform surface. The platform surface shall be free of any protrusions over 1/4 inch high and shall be slip resistant. The platform shall have a minimum clear width of 28 1/2...
-
12142(c)(2)(A) General rule
(A) General rule If a public entity operates a fixed route system any segment of which is included on the National Register of Historic Places and if making a vehicle of historic character...
-
205 and 309 Operable Parts
The 1991 Standards, at section 4.27.3, contain an exception, “ * * * where the use of special equipment dictates otherwise or where electrical and communications systems receptacles are...
-
III. Handrails and Stanchions
Handrails and Stanchions In addition to the requirements for handrails and stanchions for rapid, light, and commuter rail vehicles, consideration should be given to the proximity of handrails...
-
§ 38.53(d)(2) Exception
New vehicles operating in existing stations may have a floor height within plus or minus 11/2 inches of the platform height....