This height allows for freight passage while reducing the height of the first step of a rail car above the platform....
Search Results "Counter Height"
Commonly Searched Documents
- 
    
  
  Changes in Level and Horizontal Gaps
  
- 
    
  
  MITA Advisory Committee Members
  MITA Advisory Committee Members MINORITY REPORT ON TRANSFER SURFACE HEIGHT RECOMMENDATIONS OF THE U.S. ACCESS BOARD ADVISORY COMMITTEE RE: NPRM: M301.2.1 AND M302.2.1 HEIGHT... 
- PC 2000 Hi Lo Adult Changing Table
- 
    
  
  5.1 Transfer Surface Height
  5.1 Transfer Surface Height... 
- 
    
  
  5.1 Transfer Surface Height Recommendations
  5.1 Transfer Surface Height Recommendations Description: The transfer height is set above the finished floor surface to permit transfers form mobility devices onto the transfer surface... 
- 
    
  
  11B-703.8.4 Character height
  The uppercase letter āIā shall be used to determine the allowable height of all low resolution VMS characters of a font.... 
- 
    
  
  4.3.2 Seat Height
  4.3.2 Seat Height Seat height is an important dimension for establishing the height of built-in seating, toilet heights, tub heights, shower seat heights and other transfer related surfaces... 
- 
    
  
  M301.2.1, M302.2.1 Transfer Height
  M301.2.1, M302.2.1 Transfer Height Proposed requirement: The height of the transfer surface during patient transfer shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum... 
- 
    
  
  5.1.4 Transfer Surface Height Measurement
  5.1.4 Transfer Surface Height Measurement.... 
- 
    
  
  Route and Destination Signs
  Requirements for route and destination signs are subject to specifications for visual signs in section 703, including character height (810.6.2).... 
- 
    
  
  Slope [4.7.2]
  Severe counter slopes can do the same thing and cause footrests to scrape.... 
- 
    
  
  § 37.42(c)(4)
  (4) Mini-high platforms, with multiple mini-high platforms or multiple train stops, as needed, to permit access to all accessible cars available at that station; or 
- 
    
  
  F231.4.2 Partitions
  Where solid partitions or security glazing separate visitors from detainees, at least one of each type of cubicle or counter partition shall comply with 904.6.... 
- 
    
  
  231.4.2 Partitions
  Where solid partitions or security glazing separate visitors from detainees at least one of each type of cubicle or counter partition shall comply with 904.6.... 
- 
    
  
  11B-703.4 Installation height and location
  Signs with tactile characters shall comply with Section 11B-703.4. 
- 
    
  
  231.4.2 Partitions
  Where solid partitions or security glazing separate visitors from detainees, at least one of each type of cubicle or counter partition shall comply with 904.6.... 
- 
    
  
  11B-231.4.2 Partitions
  Where solid partitions or security glazing separate visitors from detainees at least one of each type of cubicle or counter partition shall comply with Section 11B-904.6.... 
- 
    
  
  11B-231.4.2 Partitions
  Where solid partitions or security glazing separate visitors from detainees at least one of each type of cubicle or counter partition shall comply with Section 11B-904.6.... 
- 
    
  
  11B-231.4.2 Partitions
  Where solid partitions or security glazing separate visitors from detainees at least one of each type of cubicle or counter partition shall comply with Section 11B-904.6.... 
- 
    
  
  Bathtub Seats: ADA Standard Section 610.2
  Section 610.2 covers the current ADA Standards for bathtub seats. 
- 
    
  
  11B-610.2 Bathtub seats
  The top of bathtub seats shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum above the bathroom finish floor. The depth of a removable in-tub seat shall be 15 inches... 
- 
    
  
  5.1.3 Transfer Surface Low Height Options for M301 and M302
  5.1.3 Transfer Surface Low Height Options for M301 and M302 The Committee did not agree on a final low height recommendation.... 
- Figure 505.4 Handrail Height ā Drawing from the U.S. Access Board
- 
    
  
  504.2 Treads and Risers
  All steps on a flight of stairs shall have uniform riser heights and uniform tread depths. Risers shall be 4 inches (100 mm) high minimum and 7 inches (180 mm) high maximum.... 
