608.4 Seats (Exception) This section requires a folding or non-folding seat to be provided in transfer type shower compartments....
Search Results "Companion Seat"
Commonly Searched Documents
-
608.4 Seats (Exception)
-
1009.2.2 Seat Location
In the raised position, the centerline of the seat shall be located over the deck and 16 inches (405 mm) minimum from the edge of the pool....
-
Toilets
Provide a toilet seat that is 17" to 19" above the finished floor in the north women's toilet room located in the "Celebrity Spies" exhibit area. See Standards § 4.16.3....
-
11B-610.4 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
610.4 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
1002.5.2 Transfer Height
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
1002.5.2 Transfer Height
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
610.4 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
11B-610.4 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
- Big John Original Toilet Seat Open Front Less Cover - 4W
-
610.4 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
11B-610.4 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
§ 35.151(g) Assembly areas
(g) Assembly areas. Assembly areas subject to the proposed standards shall comply with the provisions applicable to assembly areas, including, but not limited to, sections 221 and...
-
§ 35.151(g) Assembly areas.
(g) Assembly areas. Assembly areas subject to this section shall comply with the provisions of the 2010 Standards applicable to assembly areas, including, but not limited to,...
-
American Specialties Retractable Shower Seat Model 170
Requires the Premium User plan or above. (Login or upgrade your account!)
-
1009.2.2 Seat Location
In the raised position, the centerline of the seat shall be located over the deck and 16 inches (405 mm) minimum from the edge of the pool....
-
A4.16.3 Height
Height preferences for toilet seats vary considerably among disabled people....
-
A4.16.3 HEIGHT
Preferences for toilet seat heights vary considerably among disabled people....
- Big John Original Toilet Seat Open Front w Cover (White) - 3W
- Big John Standard Toilet Seat Closed Front with Cover - 6W
-
Seat width and depth
We selected 18 inches minimum seat width as a starting point with the potential to grow to 30 inches. ...
-
Seat and Row Designations
Commenters requested that seat and row designations in assembly areas be exempt from the requirements for signage....
-
Only Safety Affects Seat Assignments
Only Safety Affects Seat Assignments You must not exclude a passenger with a disability from any seat in an exit row or other location or require a passenger with a disability to sit...
-
4.1.2 Number of Wheelchair Seating Spaces
Each picnic table shall have at least one wheelchair seating space....