in the California Building Standards Code relating to access for persons with disabilities and other regulations adopted pursuant to Government Code Section 4450, and in effect at the time...
Search Results "Elevator Door Timing"
-
1.9.1.1.4
-
703.2.7 Character Spacing
Where characters have rectangular cross sections, spacing between individual raised characters shall be 1/8 inch (3.2 mm) minimum and 4 times the raised character stroke width maximum....
-
703.2.7 Character Spacing
Where characters have rectangular cross sections, spacing between individual raised characters shall be 1/8 inch (3.2 mm) minimum and 4 times the raised character stroke width maximum....
-
703.2.7 Character Spacing
Where characters have rectangular cross sections, spacing between individual raised characters shall be 1/8 inch (3.2 mm) minimum and 4 times the raised character stroke width maximum....
-
703.2.7 Character Spacing
Where characters have rectangular cross sections, spacing between individual raised characters shall be 1/8 inch (3.2 mm) minimum and 4 times the raised character stroke width maximum....
-
11B-703.2.7 Character spacing
Where characters have rectangular cross sections, spacing between individual raised characters shall be 1/8 inch (3.2 mm) minimum and 4 times the raised character stroke width maximum....
-
11B-703.2.7 Character spacing
Where characters have rectangular cross sections, spacing between individual raised characters shall be 1/8 inch (3.2 mm) minimum and 4 times the raised character stroke width maximum....
-
4.3.11.1(5)
) A portion of a stairway landing within an exit enclosure which is vented to the exterior and is separated from the interior of the building with not less than one-hour fire-resistive doors...
-
4.30.6 MOUNTING LOCATION AND HEIGHT
Interior signage shall be located alongside the door on the latch side and shall be mounted at a height of between 54 in and 66 in (1370 mm and 1675 mm) above the finished floor....
-
§ 38.31(a)
(a) Any stepwell or doorway immediately adjacent to the driver shall have, when the door is open, at least 2 foot-candles of illumination measured on the step tread or lift platform....
-
General: ADA Standard Section 234.1
Section 234.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for amusement rides.
-
PEMKO 2" Floor Plates/Safety Treads No. 190
Elevated floor plates require support ever 4" on center, at welded seams, adn as necessary for support....
-
PEMKO 2" Floor Plates/Safety Treads No. E197
Elevated floor plates require support ever 4" on center, at welded seams, adn as necessary for support....
-
PEMKO 2" Floor Plates/Safety Treads No. 190B
Elevated floor plates require support ever 4" on center, at welded seams, adn as necessary for support....
-
Figure 703.4.2 Location of Tactile Signs at Doors – Drawing from the U.S. Access Board
-
6a.
Is the lift operational at the time of the survey? Yes _____ No _____...
-
§ 37.105(a)(2)
(2) Response time (if the system is demand responsive);...
-
DOT Response
The final rule includes the NPRM's proposal for a safety requirement concerning the setback of structures and obstacles (e.g., mini-high platforms, elevators, escalators, and stairwells)...
-
§382.3 Expected maximum flight duration
Expected maximum flight duration means the carrier's best estimate of the total duration of the flight from departure gate to arrival gate, including taxi time to and from the terminals,...
-
Evaluate and adjust the volume of the Walk indication
Listen through several cycles at times when traffic is noisy and at times when traffic is quiet and adjust the Walk indication volume as necessary....
-
Qualified small business
pursuant to the criteria set forth in 13 CFR 121.103, meets the small business size standards established in 13 CFR 121.201, for the industry in which it is primarily engaged, as amended from time...
-
Lighthouse International
Our founders, Winifred and Edith Holt, blazed a trail of firsts and opened up new doors of opportunity for people without sight....
-
7.4.4.3 Slope
Where the surface is paved or is elevated above the natural ground, the slope shall not be steeper than 1:48 (2 percent) in any direction. ...
-
6.7.2 Cross Slope
Where the surface is paved or is elevated above the natural ground, the cross slope shall not be steeper than 1:48 (2 percent). ...
