Hoistway doors, car doors, and car gates shall comply with Sections 11B-409.3 and 11B-404....
Search Results "Shall"
Filters
Commonly Searched Documents
-
11B-409.3 Elevator doors
-
807.3.1 Alarms
Where audible emergency alarm systems are provided to serve the occupants of cells, visible alarms complying with 702 shall be provided....
-
703.5.6 Height from Finish Floor or Ground
Visual characters shall be 40 inches (1015 mm) minimum above the finish floor or ground....
-
1002.5.4 Wheelchair Storage Space
Wheelchair storage spaces complying with 305 shall be provided in or adjacent to unload areas for each required amusement ride seat designed for transfer and shall not overlap any required...
-
809.2.1 Location
At least one accessible route shall connect all spaces and elements which are a part of the residential dwelling unit....
-
810.2.4 Slope
Parallel to the roadway, the slope of the bus stop boarding and alighting area shall be the same as the roadway, to the maximum extent practicable....
-
206.6.1 Existing Elevators
Where elements of existing elevators are altered, the same element shall also be altered in all elevators that are programmed to respond to the same hall call control as the altered elevator...
-
5.3.3.3 Location Where Walls Not Provided
Where walls or partitions are not provided, the seat shall be positioned in a corner of the clear floor or ground space required by 5.3.2 for a left-hand or right-hand approach. ...
-
4.21.5 Controls
Faucets and other controls complying with 4.27.4 shall be located as shown in Fig. 37....
-
407.2 Contrast
Where provided, keys and controls shall contrast visually from background surfaces....
-
4.21.7 Curbs
If provided, curbs in shower stalls 36 in by 36 in (915 mm by 915 mm) shall be no higher than 1/2 in (13 mm)....
-
3.3.3 Identification of Accessible Picnic Units
Where not all picnic units are accessible, the picnic units that are accessible shall not be identified by signs at the individual units....
-
6.8.2 Grade and cross slope
The slope of a resting interval shall not be steeper than 1:33 (3 percent) in any direction....
-
4.21.5 CONTROLS
Faucets and other controls complying with 4.27.4 shall be located as shown in Fig. 37....
-
5.3.3.3 Location Where Walls Not Provided
Where walls or partitions are not provided, the seat shall be positioned in a corner of the clear floor or ground space required by 5.3.2 for a left-hand or right-hand approach....
-
6.3 Minimum Number
At least one beach access route shall be provided for each 1/2 mile of shoreline where required by 6.2....
-
F244.2.3.3 Tent Pads and Tent Platforms
Where provided, at least one tent pad and tent platform shall comply with 1013....
-
1014.3.2 Slope
The slope of the floor surface shall not be steeper than 1:48 in any direction....
-
M305.3.1 Horizontal Position
Where the support is horizontal, the top of the gripping surface shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum above the standing surface....
-
1016.8.3 Slope
Resting intervals shall have slopes not steeper than 1:48 in any direction....
-
M305.3.2 Vertical Position
Where the support is vertical, it shall be 18 inches (455 mm) minimum in length and the bottom end of the support shall be 34 inches (865 mm) high minimum and 37 inches (940 mm) high maximum...
-
1016.8.4 Turning Space
Where resting intervals are provided adjacent to an outdoor recreation access route, a turning space complying with 304.3.2 shall be provided....
-
68.101(c)(5)(F) Drinking fountains
(F) If drinking fountains are required by the lease agreement, or are provided to serve the leased area, at least one fountain shall comply with TAS 602....
-
§1193.51 Compatibility.
When required by subpart B of this part, telecommunications equipment and customer premises equipment shall be compatible with peripheral devices and specialized customer premises equipment...