bathing facilities include: clarification of the requirement that toilet and bathing facilities be provided on an accessible story in facilities exempt from the requirement for an elevator...
Search Results "Elevator Car Designation"
Filters
Commonly Searched Documents
-
Scoping for Toilet and Bathing Facilities
-
1013.2 Where required
At elevated walking surfaces appurtenant to stages and platforms for access to and utilization of special lighting or equipment. 6. ...
-
Accessible Play Components
Accessible play components are required to be on accessible routes, including elevated play components that are required to be connected by ramps....
-
1003.2.12.2 Opening limitations
At elevated walking surfaces for access to and use of electrical, mechanical, or plumbing systems or equipment, guards shall have balusters or be of solid materials such that a sphere with...
-
E) Alternate Services
If a town meeting is scheduled to be held on the second floor of a building without an elevator and a person using a wheelchair wishes to attend the meeting, the meeting should be relocated...
-
Primary Function
and return areas and employment areas (except those involving non-occupiable spaces accessed only by ladders, catwalks, crawl spaces, very narrow passageways, or freight (non-passenger) elevators...
-
Suggestion by Eldon Tipping
Measurement lines that were parallel to slopes were to connect elevation control points....
-
Biodex BioStep® 2 Semi-Recumbent Elliptical Machine
The step-through frame, simple easy-to-see and use display and comfortable, robust design make the BioStep 2 the obvious choice for cross training....
-
Appendix: Revised Annotated Bibliography
Travelers with disabilities have found it difficult to enter and leave cars due to the narrow doorways. The most difficult measure is lifting their feet into and out of the cars....
-
11B-243.1 General
Where shooting facilities with firing positions are designed and constructed at a site, at least 5 percent, but no fewer than one, of each type of firing position shall comply with Section...
-
1009.2.8 Submerged Depth
The lift shall be designed so that the seat will submerge to a water depth of 18 inches (455 mm) minimum below the stationary water level....
-
1002.5.2 Transfer Height
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
Submerged Depth
Submerged Depth Lifts must be designed so that the seat will submerge to a minimum of 18 inches below the stationary water level....
-
1002.5.2 Transfer Height
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
§27.13(b)(1)
(1) The process for filing a complaint, including the name, address, telephone number, and email address of the employee designated under paragraph (a) of this section, must be sufficiently...
-
Wheelchair
Wheelchair means a device designed solely for use by an individual with a mobility impairment for the primary purpose of locomotion in typical indoor and outdoor pedestrian areas. ...
-
§ 35.104 Wheelchair
Wheelchair means a device designed solely for use by an individual with a mobility impairment for the primary purpose of locomotion in typical indoor and outdoor pedestrian areas. ...
-
Section 2. Adaptable dwelling units
"Adaptable dwelling units", when used with respect to covered multifamily dwellings, means dwelling units that include the features of adaptable design specified in 24 CFR 100.205(c)(2)-...
-
§ 37.3 Wheelchair
Wheelchair means a mobility aid belonging to any class of three- or more-wheeled devices, usable indoors, designed or modified for and used by individuals with mobility impairments, whether...
-
§35.171(a)(1)(ii)
(ii) If the agency does not have section 504 jurisdiction, it shall promptly determine whether it is the designated agency under subpart G of this part responsible for complaints filed against...
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
12141(3) Fixed route system
(3) Fixed route system The term "fixed route system" means a system of providing designated public transportation on which a vehicle is operated along a prescribed route according to...
-
243.1 General
Where shooting facilities with firing positions are designed and constructed at a site, at least 5 percent, but no fewer than one, of each type of firing position shall comply with 1010....
-
On-Street Parking
The following designs show on-street spaces that are accessible according to ADAAG....
