Section 242.2 covers scoping requirements in the current ADA Standards for swimming pools.
Search Results "State Requirement"
Filters
Commonly Searched Documents
-
Swimming Pools: ADA Standard Section 242.2
-
11B-805.7 Built-in cabinets and work surfaces
Exceptions: Built-in wardrobes in patient bedrooms and resident sleeping rooms not required to be accessible are not required to comply with the provisions of this chapter....
-
Transfer Devices for Use with Amusement Rides: ADA Standard Section 1002.6
Designs that limit the number of transfers required from a wheelchair or mobility device to the ride seat are encouraged....
-
Shared Use Paths: ADA Standard Section 2.
The proposed rights-of-way guidelines, which address access to sidewalks, streets, and other pedestrian facilities, provide requirements for pedestrian access routes, including specifications...
-
11B-1002.6 Transfer devices for use with amusement rides
Designs that limit the number of transfers required from a wheelchair or mobility device to the ride seat are encouraged....
-
11B-206.3 Location
Where circulation paths are interior, required accessible routes shall also be interior....
-
11B-233.3.1.2.6.1 Single building with one common (lobby) entrance
The following may only be used for determining required access to multifamily dwelling units, in a single building with one common (lobby) entrance, located on a site with difficult terrain...
-
4. Information and Communication Technology (ICT) Standards and Guidelines
From the Board’s website: “On January 18, 2017, the Access Board published a final rule that jointly updates requirements for information and communication technology covered by Section...
-
11B-302.1 General
Exceptions: Within animal containment areas, floor and ground surfaces shall not be required to be stable, firm, and slip resistant....
-
11B-208.3.2 Residential facilities
In residential facilities containing residential dwelling units required to provide mobility features complying with Sections 11B-809.2 through 11B-809.4, and adaptable features complying...
-
11B-228.3.2 Minimum number
Where EVCS are provided in more than one facility on a site, the number of EVCS complying with Section 11B-228.3.2 provided on the site shall be calculated according to the number required...
-
I. INTRODUCTION
and local governments (Title II), and in all employment practices of state and local government employers with 15 or more employees (Title I). ...
-
Contours of Disability in America
Carrie Buck argued before the Court that state-imposed sterilization, based on disability, was unconstitutional. The Court disagreed....
-
Door and Gate Opening Force: ADA Standard Section 404.2.9
Section 404.2.9 covers the current ADA Standards for door and gate opening force.
-
Guest Rooms with Communication Features: ADA Standard Section 806.3
Guest rooms required to provide communication features shall comply with 806.3. Advisory 806.3 Guest Rooms with Communication Features....
-
Residential Facilities: ADA Standard Section 208.3.2
Section 208.3.2 covers scoping requirements in the current ADA Standards for the location of parking spaces in residential facilities.
-
11B-209.2.1 Passenger drop-off and loading zones
Passenger drop-off and loading zones, except those required to comply with Sections 11B-209.2.2 and 11B-209.2.3, shall provide at least one passenger drop-off and loading zone complying...
-
11B-604.8.1.5 Grab bars
Where separate grab bars are required on adjacent walls at a common mounting height, an L-shaped grab bar meeting the dimensional requirements of Sections 11B-604.5.1 and 11B-604.5.2 shall...
-
11B-206.2.3.2 Distance to Elevators
In new construction of buildings where elevators are required by Section 11B-206.2.3, and which exceed 10,000 square feet (929 m2) on any floor, an accessible means of vertical access via...
-
11B-211.2 Minimum number
The 2022 California Plumbing Code (CPC), Table 4-1 provides minimum plumbing fixture requirements for new buildings, and changes of occupancy or use in an existing building resulting in...
-
Section 36.303 Auxiliary Aids and Services (Section-By-Section Analysis and Response to Comments)
This requirement is based on section 302(b)(2)(A)(iii) of the ADA....
-
F216.13 Trailhead Signs
the technical requirements in 1017.11, regardless of whether the trails comply with the technical requirements in 1017....
-
a) "Neighborhood" Access Theory
In addition, Margen, who was not received as a program access expert, later contradicted himself, stating that the services offered at one park need not be duplicated at every park, "but...
-
Whitehall Mfg. 24" Grab Bar L-Shaped Closure Plate
Model Number: 1110-1 Features: 304 stainless steel cylindrical tub construction; a L-shaped closure plate is welded on to meet Ligature-Resistant requirements....
