Each viewing area that is required to be accessible by section 3.4.1 shall have a clear ground or floor space 36 inches (915 mm) minimum by 48 inches (1220 mm) minimum positioned for either...
Search Results "Regarded as Having an Impairment"
-
3.4.4 Clear Ground Space and Turning Space
-
Door Closing Speed Tool
We have this tool in a heavy, poly-plastic that will hold up to the rigors of architectural surveys. It's also waterproof and cleanable!...
-
Sides of Curb Ramps [§406.3]
Sides of Curb Ramps [§406.3] Curb ramps can have returned sides, but a top landing is required under all conditions to allow maneuvering to and from the run....
-
16(a)(v)
(v) The accessible rooms for individuals with mobility disabilities have the maneuvering clearances for beds specified in ADA Standards §9.2.2(1), to and within the bathroom (ADA Standards...
-
Rise [§405.6]
.), but there is no limit on the number of runs a ramp may have. Long ramps with many runs can be strenuous for people using manual wheelchairs....
-
§ 38.113(a)(1)
required to be accessible by §38.111(a) and where the spaces required by §38.111(d) of this part are located, and at least one adjacent doorway into coach passenger compartments shall have...
-
407.4.7.2 Keypads
The number five key shall have a single raised dot. The dot shall be 0.118 inch (3 mm) to 0.120 inch (3.05 mm) base diameter and in other aspects comply with Table 703.3.1....
-
608.2.2 Standard Roll-In Type Shower Compartments
roll-in type shower compartments shall be 30 inches (760 mm) wide minimum by 60 inches (1525 mm) deep minimum clear inside dimensions measured at center points of opposing sides and shall have...
-
705.1.2 Dome Spacing
Truncated domes in a detectable warning surface shall have a center-to-center spacing of 1.6 inches (41 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch...
-
Work Areas (Preamble, Section-by-Section Analysis)
They would not have required that all individual work stations be constructed or equipped (for example, with shelves that are accessible or adaptable) to be accessible....
-
POLLING PLACE ACCESSIBILITY IS REQUIRED BY THE AMERICANS WITH DISABILITIES ACT
Title II of the ADA requires state and local governments (“public entities”) to ensure that people with disabilities have a full and equal opportunity to vote....
-
2.4.1 Current Marketplace Dynamics
These federal laws also require that persons with disabilities have an equal opportunity to participate in and benefit from the providers’ medical services, including having access to health...
-
5.1.1 Transfer Surface Height Adjustability Recommendation for M301 and M302
have height adjustable seats that swivel to assist with alignment for transfers....
-
Complaints to the Department of Justice and Other Federal Agencies
(ii) When the Department of Justice receives a complaint for which it does not have jurisdiction under section 504 and is not the designated agency, it may exercise jurisdiction pursuant...
-
Executive Order 13132
., p. 206, requires executive branch agencies to consider whether a rule will have federalism implications....
-
Mary Ann Hay, IALD, LEED™ AP. Artificial Lighting
and have the space feel comfortable....
-
Why a smooth surface door or kickplate is important
Remember that the latch that hits the push rim is nicking the surface your fingers have to grasp thousands of times a day for years....
-
How to Get Avakin Life Hack Free Avacoins & Crowns Mod apk Personal Cheats
Now I have a "For Sale" section in my apartment where I display items I’m looking to offload. It’s like running my own little boutique! 5....
-
Sections 1630.2(j)(5) and (6) Examples of Mitigating Measures; Ordinary Eyeglasses or Contact Lenses
These definitions have been more fully discussed in the portions of this interpretive guidance concerning the rules of construction in §1630.2(j)(1)....
-
a. Public Television and Videos
For persons who are blind or have low vision, detailed audio description may be added to describe important visual images....
-
11B-407.4.6.2.1 Size and shape
Buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in their smallest dimension and be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding surface...
-
§382.57(c)(6)(iv)(B) Tactile symbols
Function key surfaces must have tactile symbols as follows: Enter or Proceed key: raised circle; Clear or Correct key: raised left arrow; Cancel key: raised letter ex; Add Value key: raised...
-
§ 36.303(g)(4)(ii)
assistive listening receivers that the public accommodation is already required to provide at its movie theaters in accordance with Table 219.3 of the 2010 Standards, if those receivers have...
-
609.2.2 Non-Circular Cross Section
Grab bars with non-circular cross sections shall have a cross-section dimension of 2 inches (51 mm) maximum and a perimeter dimension of 4 inches (100 mm) minimum and 4.8 inches (120 mm)...