The space between the wall and the grab bar shall be 1½ inches (38 mm). The space between the grab bar and projecting objects below and at the ends shall be 1½ inches (38 mm) minimum....
Search Results "Lavatory Clear Floor Space"
-
609.3 Spacing
-
11B-407.4.8.1.3 Floor arrival
As the car passes a floor and when a car stops at a floor served by the elevator, the corresponding character shall illuminate. Exception: Reserved....
-
407.12.3.2.2 Knee and Toe Space (Section-by-Section Analysis)
407.12.3.2.2 Knee and Toe Space (Section-by-Section Analysis) This section proposes dimensions for knee and toe space under ICT when an obstructed forward reach is provided....
-
§ 36.406(f) Assembly areas
(f) Assembly areas. Assembly areas subject to this section shall comply with the provisions of the 2010 Standards applicable to assembly areas, including, but not limited to,...
-
§ 36.302(f)(4)
(4) Purchasing multiple tickets.
-
1.9.1.1.2
1.9.1.1.2 All buildings, structures and facilities that are leased, rented, contracted, sublet or hired by any municipal, county, or state division of government, or by a special...
-
11B-106.5 Defined terms
CLEAR FLOOR SPACE CLOSED-CIRCUIT TELEPHONE COMMERCIAL FACILITIES COMMON USE COMPLY WITH CROSS SLOPE CURB CUT CURB RAMP DETECTABLE WARNING DIRECTIONAL SIGN...
-
11B-224.7 Housing at a place of education
Housing at a place of education subject to this section shall comply with Sections 11B-224.1 through 11B-224.6 and 11B-806 for transient lodging guest rooms. For the purposes of the...
-
Where must the wheelchair symbol be posted?
entrances to a building if the main entrance is not accessible Accessible Parking Spaces and Loading Zones The only legal requirement for accessible parking spaces is to post...
- Access Board: Tactile Sign Raised Character Requirements
-
68.101(c)(5)(F) Drinking fountains
(F) If drinking fountains are required by the lease agreement, or are provided to serve the leased area, at least one fountain shall comply with TAS 602. If more than one drinking...
-
§ 36.406(f) Assembly areas
(f) Assembly areas. Assembly areas subject to the proposed standards shall comply with the provisions applicable to assembly areas, including, but not limited to, sections 221 and...
-
Dining Surfaces and Work Surfaces for Children's Use: ADA Standard Section 902.4
EXCEPTION: Dining surfaces and work surfaces that are used primarily by children 5 years and younger shall not be required to comply with 902.4 where a clear floor or ground space complying...
-
609.3 Spacing
The space between the wall and the grab bar shall be 1 1/2 inches (38 mm)....
-
11B-224.7 Housing at a place of education
Housing at a place of education subject to this section shall comply with Sections 11B-224.1 through 11B-224.6 and 11B-806 for transient lodging guest rooms. For the purposes of the...
- Murdock Manufacturing Floor Mount, Wall Outlet Toilet
-
11B-1008.4.4 Entry points and seats
Where play components require transfer to entry points or seats, the entry points or seats shall be 11 inches (279 mm) minimum and 24 inches (610 mm) maximum from the clear floor or ground...
- SmartCells Flooring: Installation Video
-
Location and Spacing
Location and Spacing Rooms with an area than can be circumscribed by a circle 50 feet in radius can be covered by a single centrally located strobe of 75 cd....
-
Moving to the House Floor
Moving to the House Floor The ADA proceeded rapidly to the House floor after the Judiciary Committee completed its work....
-
Swimming Pools, Wading Pools & Spas
Word Fillable Form (2.8MB) Word Non-Fillable Form (2.6MB) PDF Non-Fillable Form (1.0MB)
-
Toilet Compartments: ADA Standard Section 213.3.1
Section 213.3.1 covers scoping requirements in the current ADA Standards for toilet compartments.
-
Disorienting Spaces (slide 7)
These are two images from the [research] project that Dennis talked about yesterday, where they were analyzing interior spaces that visually say one thing but really mean another....
-
2. b. i. Clear door openings
Clear door openings: Door openings should provide a clear width of 32 inches (815 mm) minimum....

