And the whole [interior is] all white, clear white, everything white – the ceiling, the floor, the floor tiles, the wall, the columns, the furniture....
Search Results "Ground Floor"
-
Lighting Contrast and Conceptual Design
-
General [4.5.1]
Affected industries (floor finishes, ceramic tile, and plumbing fixtures) each employ a different testing method in designating the slip-resistance of their products....
-
11B-805.7 Built-in cabinets and work surfaces
A 30-inch by 48-inch clear floor space, in compliance with Section 11B-305, shall be centered in front of the display screen....
-
11B-604.8.1.1 Size
shall be 60 inches (1524 mm) wide minimum measured perpendicular to the side wall, and 56 inches (1422 mm) deep minimum for wall hung water closets and 59 inches (1499 mm) deep minimum for floor...
-
Fur out the wall
Don't cut the concrete or flooring or move plumbing. Just need to make sure all other clearances, (42" from center line to adjacent wall/fixture is clear, etc.) ...
-
California: Toilet Grab Bars - Uneven height allowed?
Grab bars shall be installed in any manner that provides a gripping surface at the specified locations and that does not obstruct the required clear floor space....
- Halsey Taylor Cane Touch Apron for HAC ADA Series
- Willoughby Industries WAW-2322-DMF AquaWave® Two Station Solid Surface Lavatory System for Deck Mounted Faucets
- Willoughby Industries WAW-2333-DMF AquaWave® Three Station Solid Surface Lavatory System for Deck Mounted Faucets
- Willoughby Industries WAW-2311-DMF AquaWave® Single Station Solid Surface Lavatory System Deck Mounted Faucet
- Willoughby Industries WAF-440 AquaFount® Four Station Solid Surface Washfountain
- Panda S.10 All Aluminum Lift & Slide System
-
Elevator Exemption
The 500 square foot maximum was based on a floor area allowance of 100 square feet per occupant, which is consistent with model building code requirements for business and industrial occupancies...
-
610.3 Shower Compartment Seats
The top of the seat shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the bathroom finish floor. Seats shall comply with 610.3.1 or 610.3.2....
-
809.2 Residential Dwelling Units with Mobility Features
809.2 Residential Dwelling Units with Mobility Features As discussed below, the final rule adds technical requirements to this section for floor surfaces, bedrooms, and weather alert...
-
Why are surface characteristics specified?
Findings from this limited human-subject testing confirmed that individuals who have gait and mobility disabilities make greater demands on the walking surfaces of floors, ramps, and walkways...
-
703.4.2 Location
Signs containing tactile characters shall be located so that a clear floor space of 18 inches (455 mm) minimum by 18 inches (455 mm) minimum, centered on the tactile characters, is provided...
-
Addendum G: Comparison of Transfer Abilities between Men and Women
The average wheelchair seat to floor height for men was 22.2 (±1.44) inches and the average height for women was 21.65 (±1.31) inches....
-
A. Signs
If signs are provided for the following spaces, are the signs mounted on the wall (not the door) to the latch side of the door and centered 60" above the floor so that they can be easily...
-
C. Accessibility Within Toilet Rooms
Is at least one stall at least 60 inches wide and 56 inches deep (wall mounted toilet) or 59 inches deep (floor mounted toilet)?...
-
610.3 Shower Compartment Seats
The top of the seat shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the bathroom finish floor. Seats shall comply with 610.3.1 or 610.3.2. ...
-
407.12.2.1 Unobstructed Side Reach (Section-by-Section Analysis)
proposes that, where the operable part is located 10 inches or less behind the vertical reference plane, the operable part must be 48 inches high maximum and 15 inches high minimum above the floor...
-
What access do I need?
◼ I need an exam table that lowers to 17–19 inches from the floor. ◼ I need help getting on and off the exam table. ◼ I need to bring my service dog....
-
Tactile and Visual Signs [ADA Standards §216.2, §216.4.1]
This requirement applies to signs identifying stairways, floor levels, and areas of refuge. Examples of Signs Required to Meet Tactile and Visual Criteria...