3.3.13 360-Degree Turn The standards on the space requirements for a 360-degree turn are quite similar across countries, ranging from 1500 mm (59 in.) in Canada and the U.K. to 1525...
Search Results "Incidental Space"
-
3.3.13 360-Degree Turn
-
Producing Printed Material in Large Print
magnifiers) Text should begin at the left margin (centered text is harder to read) Use right margins that are ragged, not justified (right-justified margins can create awkward spacing...
-
3) Signs
3) Signs ADAAG: * Signs designating permanent rooms and spaces (men's and women's rooms; room numbers; exit signs) must have raised and Brailled letters; must comply with finish and...
-
3.12 Other Modified Theaters
Layton Movies 7, Layton, Utah: Auditoria 2, 3, 4, 5 and 6. 3.12.2 In each of the auditoria listed below Cinemark will add sufficient wheelchair spaces to provide the required number...
-
Accessible Routes
Accessible Routes Accessible routes are continuous, unobstructed paths connecting all accessible elements and spaces of a building or facility....
-
903 Benches
Commenters indicated that this provision could be misinterpreted as allowing the space to be provided in front of the bench at one end....
-
Telescopes and Periscopes
This maneuvering space must be at least 36 inches by 48 inches (915 millimeters by 1,220 millimeters)....
-
11B-203 General exceptions
Unless there is an exception, each space and/or element must be made accessible in compliance with Chapter 11B....
-
BS8300:2001 Research
They include information on space required for “kneeholes,” reaching abilities of wheeled mobility users, clear floor area space requirements and maneuvering clearances....
-
Use of the International Symbol of Accessibility and Other Signs
In accordance with ABAAS, section 216, ISA must be posted at only six places: At accessible parking spaces in parking lots with five or more designated parking spaces....
-
11B-202.3 Alterations
Where existing elements or spaces are altered, each altered element or space shall comply with the applicable requirements of Division 2, including Section 11B-202.4....
-
§382.67(b)
(b) If you are a carrier that uses the seat-strapping method to stow a manual passenger wheelchair, you must ensure that there is priority space for at least two such wheelchairs, if stowing...
-
F.
Some complainants who use wheelchairs informed the United States that the wheelchair spaces available to them in some of Cinemark's auditoria with 300 seats or less were too close to the...
-
Definition [F106.5]
A picnic unit is an outdoor space in a picnic facility that is used for picnicking and contains at least one outdoor constructed feature....
-
Barriers to People with Disabilities
Barriers to People with Disabilities - characteristics of spaces, elements, or services covered under the ADA Regulations or ADA Standards for New Construction that do not comply with those...
-
8.4 Card Catalogs and Magazine Displays
Minimum clear aisle space at card catalogs and magazine displays shall comply with Fig. 55....
-
Trailhead
For the purpose of the FSTAG a trailhead is an outdoor space that is designated by the entity responsible for administering or maintaining the trail to serve as a primary access point to...
-
5.7 Raised Platforms
In banquet rooms or spaces where a head table or speaker’s lectern is located on a raised platform, the platform shall be accessible in compliance with 4.8 or 4.11....
-
4.32.3 Knee Clearances
If seating for people in wheelchairs is provided at tables or counters, knee spaces at least 27 in (685 mm) high, 30 in (760 mm) wide, and 19 in (485 mm) deep shall be provided (see Fig....
-
ADAPTABILITY
The ability of certain building spaces and elements, such as kitchen counters, sinks, and grab bars, to be added or altered so as to accommodate the needs of either disabled or nondisabled...
-
(2)
(2) Accessible restrooms should be in close proximity to at least one seating location for persons using mobility aids and should be connected to such a space by an unobstructed path having...
-
F219.2 Required Systems
In each assembly area where audible communication is integral to the use of the space, an assistive listening system shall be provided....
-
404.2.6 Doors in Series and Gates in Series
The distance between two hinged or pivoted doors in series and gates in series shall be 48 inches (1220 mm) minimum plus the width of doors or gates swinging into the space....